Daimler Mercedes Benz Automotive Components Tests

Automotive Tests

Daimler Mercedes Benz Automotive Components Tests

EUROLAB Laboratory is a complete automotive, including all requirement, from chemical analysis to mechanical and environmental testing for automotive parts of automotive materials, component parts, component parts, composites and surrogate plates used in passenger cars, multi-purpose passenger cars, trucks and buses according to Daimler Mercedes manufacturing standards. Offers a range of testing services. Daimler is a global German automaker and owner of the Mercedes-Benz brand. As the complexity of vehicle technology is constantly increasing, collaboration between OEMs and expert test partners is important. A full examination of the system should ensure that your product performs in all driving situations, is robust and safe.

Daimler Mercedes Benz Automotive Components Tests

EUROLAB supports developers and manufacturers of automotive materials with expertise in plastics, composites, components and metals. EUROLAB experts in the field of automotive materials understand the behavior and properties of automotive materials and have the latest laboratory equipment and techniques.

  • Automotive Materials Weathering Test
  • Chemical Testing and Analysis
  • Permanent function test
  • Final product inspection of automotive components
  • Polymers and Plastics
  • Nondestructive Testing (NDT) Services
  • Quality control
  • Automotive Materials Test
  • Environmental exposure (-45 °C to 177 °C)
  • Automotive Volatile Organic Compound (VOC) Test
  • Approval test
  • ISO/EN Standards


We provide the following test services within the scope of Daimler Mercedes automotive components tests.


DBL 4040 Pipes for brake and fuel systems
DBL 4062 Delivery features; Electrolytically galvanized flat products
Body Parts Made of DBL 4093 Press Hardened Sheets
DBL 4917 Delivery features; Integrated die casting support from aluminum
DBL 5010 Delivery features; Aggregate cast parts made of Mg
DBL 5306 Car interior materials
DBL 5306.18 Tests
DBL 5306-25 Tests
DBL 5306-26 Tests
DBL 5306§ 3.2 Measuring surface and wear figure
DBL 5306-4 Tests
DBL 5306-5 Tests
DBL 5306-6 Tests
DBL 5307 flammability
DBL 5307.10 Flame retardant properties interior trim parts
DBL 5307.11 Tests
DBL 5307 § 5.1 Supply Specification Flame retardant properties - § 5.1: Test for determining the horizontal burning rate of materials
DBL 5307 § 6.1 Supply Specification Flame retardant properties - § 6.1: Test for determining the horizontal burning rate of materials
DBL 5310 Supply Specification - Leather for interior
DBL 5310 § 7.11 Color stability
DBL 5310 § 7.27 Color stability
DBL 5311 Supply Specification Leather
DBL 5326 Plain Textile Fabrics, Sewing Production Processes Circular Knitting, Knitting (Warken)
DBL 5327 Textiles, Plain Fabrics, Weaving Processes
DBL 5330 Supply Specification - Woven faux leather fabric
DBL 5333 Supply Specification - Films and sheets
DBL 53333 Supply Specification Films and sheets
DBL 5348 Supply Specification - Faux Leather with Foam and Compact
DBL 5352 Supply Specification Deep Drawn Veneer
DBL 5353 Supply Specification Foam Films and Coating
DBL 5381 Supply features Molded coatings (spray and powder cast coatings) made of TPU, Polyolefin and PVC
DBL 5399 Contamination and cleanability behavior
DBL 5400 Supply specification - Components made of glass fiber reinforced thermosets
DBL 5401 Liefervorschrift - Teile aus dur Plastikschen Kunststoffen im Motor- und Aggregatbereich
DBL 5403 Functional Parts made of thermoplastic materials for motor and sub-assembly related applications
DBL 5404 Parts of thermoplastic materials for the direct and indirect space of the passenger compartment, passenger compartment heating, cabin ventilation, lining and casing
DBL 5404.00
Supply Specification Parts Made from Thermoplastics in the DBL 5405 Fuel System
DBL 5406 Supply Specification - Parts made of thermoplastic in the refrigerant circuit
Thermoplastic Parts for DBL 5408 Engine Air Management
DBL 5409 Plastic Parts in Engine Oil
DBL 5410 Supply Specification - Thermoplastic parts for control elements, bearing elements, fasteners and spacers
DBL 5411 Plastic Surfaces for Exterior Flooring Parts
DBL 5412 Supply-Specification - Plastic moldings made of plasticized PVC
DBL 5413 Supply Specification, Plastic profiles made of Plasticized PVC and ABS-PVC
DBL 5416 Procurement Specification ; Parts Made of Thermoplastics for Panels, Enclosures and Functional Parts for Exterior Applications
DBL 5417 Supply Specification, Molded Parts Made of Long Fiber Reinforced Thermoplastics, Hot Press
DBL 5418 Supply Specification - Injection Molded Parts Made from Fiber Reinforced Thermoplastics for Structural Requirements
DBL 5420 Delivery Instructions - plastic insulating parts for the low electrical voltage range
DBL 5422 Supply Specification Glass Encapsulation
DBL 5423 Foamed Thermoplastic Parts (Injection Molding)
DBL 5425 Supply specification - Coating / painting of plastic parts on the vehicle exterior
DBL 5430 Emission and odor in the car interior
DBL 5450 Supply Characteristics - Foamed Flexible Polyurethane Based Cellular Plastics
DBL 5452 Supply Specification - Foam molded flexible cellular polyurethane based materials
DBL 5453 Surface Made of Reinforced Polyurethane Foam
DBL 5454 Supply Specification Closed Foam
DBL 5455 Supply Specification - Polyolefin foam
DBL 5456 Supply Specification - Composite foam blocks for indoor applications
DBL 5459 Supply Specification Parts Made of Reaction Injection Molded Polyurethane (PUR-RIM) for Body/Cabin Outdoor Applications
DBL 5460 Supply Specification - Parts made of energy-absorbing foams for interiors
DBL 5461 Supply Specification - Parts made of energy-absorbing foams for outdoors
DBL 5462 Supply Specification - Molded Rigid and Semi-Rigid Foams
DBL 5463 Lightweight multi-layered sound insulation for indoor and outdoor applications
DBL 5468 Supply Specification - Polyurethane integral structural foam for interior design parts
DBL 5471 Verkleidungs- und Formpolsterteile für Fahrzeuginnenräume (Verbundteile)
DBL 5471.92
DBL 5472 Supply Specification, Surface material in sandwich design
DBL 5474 Supply Specification, Multilayer Composite Film for Indoor Equipment Sensor Systems
DBL 5481 Extruded, thermoformed plastic sheets
DBL 5485 Supply Specification - Direct laminated coatings for vehicle interiors (Rear compression/In-mold decoration)
DBL 5490 Specification - Plastic parts made from recycled materials
DBL 5527 Contact corrosion
DBL 5555 Finished Parts and Semi-Finished Products Made of Organic Polymer Materials General Conditions and Test Methods
DBL 5556 Molded Elastomer Parts Subject to Normal Mechanical Stress
DBL 5557 Elastomer Parts Subject to Mechanical-Dynamic Stress with Temperature Application Range up to 200 °C
DBL 5558 Elastomer parts subjected to high and extremely high mechanical-dynamic stress with a temperature application range of up to 100 °C
DBL 5559 Supply Specification, Manufactured parts thermoplastic polyurethane elastomers (TPU) Temperature application range up to 120 °C
DBL 5562 Supply Specification, Thermoplastic Elastomers (TPE)
DBL 5568 Supply Specification Heat resistant elastomer parts up to 150 to 250 °C, moderately resistant to petroleum based products
DBL 5571 Profile Sections and Molded Parts Made of Elastomers (EPDM) in the Body Region
DBL 5572 Single and multi-layer mats
DBL 5573 Supply Specification, Molds and extrusions made of Sponge rubber (foamed elastomers with open closed cell structure)
DBL 5574 Supply Specification, Moldings and hoses made of cellular rubber (closed-cell porous elastomers)
DBL 5575 Supply Specification, fiber-floculated elastomer parts for body sealing
DBL 5578 Supply Specification - Elastomer parts with anti-friction coating
DBL 5587 Elastomer Materials for Components in Motor Vehicles
DBL 5610 Supply Specification - Safety glasses for vehicle windows
DBL 5620 Organic glass for lighting equipment
DBL 5765 Supply Specification - Wood fiber chipboards
DBL 5768 Compression molded fibrous materials
DBL 5805 Supply Specification, Reverse Side Lamination Material
DBL 5809 Supply Specification - Knitted fabrics
DBL 5814 Supply Specification Airbag
DBL 5816 Supply specifications for microfiber non-woven fabrics and microfiber fabrics
DBL 5818 Supply Specification Knitted Fabrics
DBL 5853 velvet carpet
DBL 5867 Requirements technical fabrics
DBL 5868 Supply Specification - Needle Fabrics
DBL 5868 A Supply Specification - Needle fabrics
DBL 5869 Supply Specification, Nonwoven fleece
DBL 5872 Textile Flooring
DBL 5881 Supply Specification - Synthetic Upholstery Fabric
DBL 5882 Supply Specification - Woven upholstery fabric
DBL 5883 Supply Specification - Synthetic Upholstery Fabric
DBL 5884 Supply specification - Woven Upholstery Fabric
DBL 5911 Supply Specification Piping
DBL 5912 Supply Specification - Belts and Belts
DBL 5917 Supply Specification - Tap and close fasteners
DBL 5919 Supply Specification - Knitwear tape
DBL 5920 Elastic Hair Fabrics
DBL 5934 Rubber Bands, Cords and Fabric Bands
DBL 5937 Supply Specification - Tubular tricot tape
DBL 5939 Supply Specification Tapes
DBL 5943 Fully Synthetic Twisted Yarns
DBL 5955 Supply Specification Filler
DBL 5972 Single Layer Acoustic Insulation Materials
DBL 6037 Requirements elastomers fuel cell
O-Rings and Molded Gaskets Made from DBL 6038 Elastomers
DBL 6254 Coolant Hoses
Supply Specification, hoses and lines for DBL 6260 Power steering and suspension systems
DBL 6269 Supply Specification, Hoses for windshield washer systems and headlight wash/wiper systems
DBL 6515 Supply Specification ; Determination of technical cleanliness of components
DBL 6516
DBL 7260 Delivery features; Synthetic resin stoving top coat
DBL 7305 Delivery features; Paints, air and heat drying for axles, steering wheels, propeller shafts and other attachments
DBL 7310 Supply Specification - Paints for brake discs
DBL 7381 Supply Specification - Coating for major passenger vehicle components/body panels and other functional parts with high abrasive stress
DBL 7381.30 Scope of approval for wheel surfaces
DBL 7382 Supply Specification - Coating of Metallic Parts in Vehicle Interiors
DBL 7384 Supply Specification - Coating of plastic parts in vehicle interiors
DBL 7385 Delivery features; Single or multi-layer coating for decorative wood particles
DBL 7390 Base coat (primer) as the basis for subsequent topcoats
DBL 7391 Supply Specification - Coating / Painting for High Abrasive Stress Parts
DBL 7392 Delivery specifications; Coating/painting with moderate corrosion stress
DBL 7397 Condensation resistant paint
DBL 7399 Procurement Specification ; Enamels, paints and similar coating materials and related coatings. General conditions and tests
DBL 7402 Decorative coating of plastic parts by plasma or vacuum deposition
DBL 7403 Decorative coating of metallic internal components (e.g. PVD) by plasma or vacuum deposition
DBL 7904 Supply Specification - Adhesive applications on components for assembly requirements
DBL 7906 Supply Specification - Self Adhesive Components
DBL 8230 Supply Specification - Self Adhesive Labels
DBL 8427 Corrosion protection coating for components made from single-walled welded steel pipes
DBL 8440 Parts made of ferrous materials with inorganic coating (zinc flake coating)
DBL 8451 Electroplated zinc or zinc alloy coatings for components made of ferrous materialsZT
DBL 8459 Supply Specification - Nickel-, nickel-chromium or copper-nickel-chrome plated parts
DBL 8465 Electroplated Parts Made of Plastic with Metallic and Additional Coatings
DBL 8585 banned substances list
DBL 9025 Supply specification - Noise capsules in motors
DBL 9100
DBL 9201 aluminum parts with anodic surface
DBL 9202 Interior Decorative Parts
DBL 9440 Metric Threaded Fasteners - Surface Protection and Supplement TL / VDA 235-104: Cr(VI)-free protection surface for Metric Threaded Fasteners.
DBL 9441 Supply Specification - Surface protection for fasteners for direct screw connection in metal sheets and plastic (non-metric threads)
DBL 9455 Supply Specification - Hot dip galvanized flat products
MBN 10284-2 EMC Performance Requirements - Component Testing - performance requirements for electrical and electronic components and systems in vehicles
MBN 10305-1 E/E Environmental Test Part 1: Test Specifications
MBN 10473-1 Measurement of colors
MBN 10473-2 Technical data for color measurement
MBN 10476 Visual color assessment of exterior painted bodies, inserts and sheet metals
MBN 10494-1 Part 1: General Requirements
MBN 10494-10 Paint Test Methods - Part 10: Specific Test Methods for Dry Condition Electrodeposition Coatings
MBN 10494-2 Part 2: Testing Paints in Wet Condition
MBN 10494-3 Paint Test Methods – Part 3: Processing Tests
MBN 10494-4 Paint Test Methods – Part 4: Optical Tests
MBN 10494-5 Paint Test Methods – Part 5: Technical-Mechanical Tests
MBN 10494-6 Paint Test Methods – Part 6: Climate Tests
MBN 10494-6 § 5.9.1 Artificial weathering - CAM 180
MBN 10494-7 Paint Test Methods – Part 7: Resistance to Chemicals, Test Mixtures and Test Concentrates
MBN 10494-8 Paint Test Methods – Part 8: Adhesion of Adhesives to the Coating
MBN 10494-9 Paint Test Methods – Part 9: Specific Test Methods for Electrodeposition
MBN 10505 Weathering in humid-hot climate
MBN 10506 Weathering in dry-hot climate
MBN 10526 Test methods for self-adhesive components
MBN 10529 Anhang A.2 TnP-Test
MBN 10529 Annex A.2 TnP testing
MBN 10615 EMV
MBN 15306-3 § 5.15 Scratch resistance (against nail or knife blade)
MBN 15306-3 § 5.16 Heat resistance - folded exposure
MBN 15306-3 § 5.21 Slip/adhesion coefficient of friction
MBN 15306-4 § 5.2 Color fastness (Vessel wear)
MBN 161216 Bending test
MBN 55555-6 § 5.1 Scratch resistance (against nail or knife blade)
MBN 55555-6 § 5.10 Friction/adhesive friction coefficient
MBN 55555-6 § 5.12 Heat resistance - folded exposure
MBN 55555-6 § 5.7 wear
MBN LV 124-1 Electrical and Electronic Components in Motor Vehicles up to 3,5 tons – General Requirements, Test Conditions and test methods, Part 1: Electrical Requirements and 12 V Vehicle Electrical System testing.
MBN LV 124-2 Electrical and electronic components in asenger vehicles up to 3,5 tons - General requirements, test conditions and test methods - Part 2: Environmental requirements
PA 0,0019 Mechanized ultrasonic testing of radial bores and Turbi
PA 0,0036 Mechanized ultrasonic testing of axial bores and turbines
PA 0,0040 Manual ultrasonic testing of coupling bolts
PA 00073 Progressive Array Ultraschallprüfung
PA 0015 scratch resistance
PA 1.0007 Mechanism and manual Operational ultrasonic testing
PA 1.0020 Phased Array - Ultrasonic testing of plug-in foot blade roots
PA 1.0023 Ultrasonic testing of riveted blades
PA 1.0029-03 Manual ultrasonic testing of screws without heated holes
PA 1.0029-04 Mechanized ultrasonic testing of heated-hole screws
PA 1.0041 Ultrasonic testing of ½ damper wires of the fuselage blade
PA 1.0083 Ultrasonic testing of overlap welded valve sets
PA 1.0084 Mechanized ultrasonic testing of heated-hole screws
PA 1.0153 Mechanized ultrasonic testing of blade root recordings
PA 1.0159 Progressive Array Ultrasonic inspection of turbine blade roots,
PA 1.0160 Mechanized ultrasonic testing of blade root recordings
Phased array ultrasonic testing of studs without PA 1.0162
PA 1.0163 Manual ultrasonic testing of foundation anchor bolts
PA 1.0177 Progressive Array Ultrasonic inspection of turbine blade roots
PA 1.0181 Progressive Array Ultrasonic testing of turbine blade roots
PA 1.0183 Progressive Array Ultrasonic testing of turbine blade roots
PA 1.0184 Progressive Array Ultrasonic testing of turbine blade roots
PA 20009 Ultrasonic testing of generator shafts subjected to operating voltage
PA 2.0013 Ultrasonic testing of couplings subjected to operating voltage:
PA 2.0017 Ultrasonic testing of generator wedges
PA 2.0020 Mechanized ultrasonic testing of shaft pump shafts
PA 2.0024 Ultrasonic testing of generator shafts subjected to operating voltage
PA 2.0026 Mechanized ultrasonic testing of generators and water chambers
PA 2.0027 Ultrasonic testing of fan hubs of
PA 2.0029 Manual ultrasonic testing of laminated core clamping bolts
PA 6.1-10-01 Medical devices, information for reprocessing
PA-P 028 Cross hatch test
PA-P 208 Condensed water constant climate test
PA-P 295 Sunscreen resistance
PA-P 315 abrasion test
PA PP PWT 3001 Climate change testing
PAPP PWT 3002 Filiformprüfung and missing Aluminumteilen
PAPP PWT 7329 Color change under defined amine atmosphere
PB VWL 709 TD analysis of organic compounds
PB VWT 217 Corrosion test of vehicle interior
PWT 3668 shear force coupling

Get Offer Now

To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.

Whatsapp