EUROLAB laboratory provides testing and compliance services within the scope of ECE R12 standard. ECE R12 test regulation relates to the protection of category M1 motor vehicles and passengers in a frontal collision, category N1.500 vehicles with a maximum allowable mass of less than 1 kg, as well as high-voltage components and systems galvanically connected to the high-voltage busbar of the electric power train, the rudder. It applies to the behavior of the mechanism and the electrical power transmission system operating at high voltage.
An application for a vehicle type approval for the protection of the driver against the steering mechanism in the event of a collision is made by the vehicle manufacturer or its duly accredited representative.
An application for approval of a type of steering control for the protection of the driver against the steering mechanism in the event of a crash must be made by the steering control manufacturer or its duly accredited representative.
Each approved type will be given an approval number. Its first two digits will indicate the series of changes that contain the most recent major technical changes to the regulation at the time of approval. The same contracting party may not assign the same number to the same vehicle type or to another vehicle type equipped with another type of steering mechanism.
Approval or extension of approval or refusal of approval of a vehicle type pursuant to this Regulation shall be communicated to the parties to the agreement implementing this regulation through a form appropriate to the model in the Annex to this regulation.
If the vehicle conforms to a vehicle type approved under one or more additional regulations to the contract in the country that has ratified it under this regulation, it does not need to be repeated; In such a case, the regulation and approval numbers and the supplementary symbols of all regulations approved in the country giving approval under this regulation will be placed in the vertical columns to the right of the indicated symbol.
The checkmark shall be clearly legible and indelible. The approval mark must be placed next to or above the vehicle data plate affixed by the manufacturer. If the steering control submitted for separate approval pursuant to this regulation meets the applicable requirements of its annexes, approval of that steering control type will be granted. This only applies to steering controls without airbags.
Each approved type will be given an approval number. Its first two digits will indicate the series of changes that contain the most recent major technical changes to the regulation at the time of approval. The same contracting party will not allocate the same number as defined to any other type of steering control.
EUROLAB laboratory, with its professional engineer staff, provides the best service to you, our suppliers and manufacturers, with 12 years of experience, within the scope of the approval of the vehicles for the protection of the driver against the steering mechanism in the event of an ECE R25 collision. Do not hesitate to contact our organization EUROLAB for all your automotive testing and service requests.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
EUROLABreporting and certification activities, United Accreditation Foundation (UAF), Turkish Accreditation Agency (TÜRKAK) ve Enterprise Accreditation Foundation (EAF) based on the accreditation provided by the accreditation body. The Enterprise Accreditation Foundation (EAF) accreditation body is also a signatory of the United Nations (UN GLOBAL COMPACT) organization.
