Ford WSS M9P8-C Elastomeric Parts Standard Test for Internal Performance

EUROLAB laboratory provides testing and compliance service within the scope of Ford WSS M9P8-C standard. The performance characteristics defined by this specification can be used to evaluate the environmental resistance of the elastomeric parts in the passenger compartment.

This specification was originally published for use with industry standards or material specifications to provide a consistent framework for all environmental testing of elastomeric parts.

All test values ​​are based on material conditioned for not less than 23 hours prior to testing in a controlled environment at 2 +/- 50°C and 5% +/- 24% relative humidity. Testing of the material should be done in the conditioning environment or immediately after removal.

Assemblies will be relatively unaffected by exposure cycles during and after testing as shown: Functionally, no excessive expansion, contraction, or bending would interfere with normal functional operations. Any successful attempt to separate components of coated or composite parts should only result in cohesion failure. Any adhesive failure will be grounds for rejection.

EUROLAB assists manufacturers with Ford WSS M9P8-C testing compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.