Ford CETP 00.00-L-467 Cyclic Corrosion, Corrosion Exposure, Mechanical and Materials Test Standard

EUROLAB laboratory provides testing and compliance services within the scope of Ford CETP 00.00-L-467 standard. This methodology provides guidance for performing mass loss testing when performing the Ford CETP 00.00-L-467 test profile in an atmospheric specification chamber.

The test consists of a 5-day test profile divided into a 2-day repeat cycle on weekdays followed by a 7-day weekend phase.

The 5-day repeat cycle consists of the following steps:

• 0,5 hour wet phase at room temperature with intermittent exposure to salt solution (6% NaCl);
• A transitional phase of 2,5 hours with drying under climate control, this is carried out in two parts; the first is a 25-minute ramp to maintain high humidity at 40% RH while raising the temperature from 95°C to 30°C. The second part requires a 4-hour transition while raising the temperature from 50°C to 95°C while simultaneously reducing the humidity from 70% RH to 2% RH. These setpoints are the target conditions at the end of each phase;
• A 50 hour phase with constant temperature and humidity (70C/15,5%RH).

Vertical airflow over test specimens, an oscillating spray bar located 1M above the target test area, and an Ascott Atmosphere chamber for testing as a psychrometric humidity reference are required.

EUROLAB assists manufacturers with Ford CETP 00.00-L-467 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.