GMW 14671 Organic Coating Standard for Bottom and Underbody Components

Automotive Tests

GMW 14671 Organic Coating Standard for Bottom and Underbody Components

EUROLAB Laboratory provides accredited testing and conformity assessment services within the scope of GMW 14671 standard. This standard provides performance requirements for organic coatings coatings on the surfaces of underbody and underbody components. It also gives an opportunity to specify the type of coating material to be used.

GMW 14671 Organic Coating Standard for Bottom and Underbody Components

These coatings are typically used on chassis components as well as other underbody and underbody components. Eight types of paints are covered by this specification:

Types A and B are cathodic e-coatings in two different thickness ranges.

C type cathodic is dipping primer except e-coat.

D type powder coating.

If Type E is specified, the applicator is free to choose Type A, B, C or D, but that choice should remain.

F-type should be further specified in the drawing using notes or paint material specification.

Type G is a solvent water based, spray applied paint.

Type H is a dip or dip spin high performance coating commonly specified for high strength control arms, links and framing. Type H coatings are normally used on bare steel surfaces.

As Eurolab laboratory, we provide the best service to you, our manufacturers, with our experienced and professional staff within the scope of all automotive standards.

Get Offer Now

To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.

Whatsapp