HYUNDAI/KIA Automotive Part Tests

EUROLAB Laboratory HYUNDAI/KIA group offers a full range of automotive testing services for automotive parts, including all requirement from chemical analysis to mechanical and environmental testing. EUROLAB provides accredited testing services to manufacturers, designers and all bidders in outsourcing in automotive laboratories to perform routine and non-routine automotive components, parts and full vehicle tests.

We provide the following testing services for the HYUNDAI/KIA group.

• MS 201-02 Prohibition of harmful substances
• MS 210-05 Molded internal parts
• MS 213-57 PP materials requirements
• MS 263-55 This specification applies to the characteristics and quality of internally braided heat resistant high pressure rubber hose for heater (hereinafter "hose") for use in heating systems.
• MS 300-08 Flame resistance, Internal material
• MS 300-34 Fragrance
• MS.90053 Paint requirements interior parts
• Hyundai/KIA - wear resistance, smooth surfaces
• Hyundai MS 213-28: Talc Filled Polypropylene
• Hyundai MS 214-04: PC+ABS alloy Crash cushion, interior trim, etc.
• Hyundai MS 343-11 § 4.14 - Wrinkle Resistance Material properties - Wrinkle Resistance
• Hyundai/KIA - MS 210-05 - Material Properties For molded plastics for use in the overall performance of automotive interior parts
• Hyundai/KIA KS M 6518 § 5 - Tensile test Physical test method for vulcanized rubber; § 5: Tensile test
• Hyundai/KIA MS 200-08 - Migration dyeing Resistance of coated fabrics and plastic film to degradation and migration staining
• Hyundai/KIA MS 200-11 - Resistance to soil impregnation Contamination test for artificial leather and plastic sheet
• Hyundai/KIA MS 200-34 § 4.10 - Standard Test Method for Pad for Repeated Compression Seat, § 4.10 Repeated Compression Impact Test
• Hyundai/KIA MS 200-34 § 4.7 - Stress relaxation test Standard Test Method for Pad for Seat, § 4.7 Compression Stress Relaxation Test
• Hyundai/KIA MS 200-34 § 4.8 - Vibration test Standard Test Method of Pad for Seat, § 4.8 Vibration Characteristics Test
• Hyundai/KIA MS 200-38 § 4.3 - Heat cycle test with infrared irradiation Test Standard - Steering § 4.3 Heat Cycle Resistance Test
• Hyundai/KIA MS 200-41: Test Standard - Soft Vulcanized Rubber
  
  Hyundai/KIA MS 201-02 § 3.1.1/ DIN EN 62321 - Determination of heavy metals Prohibition and notification of the use of harmful substances - parts and metals - § 3.1.1: 4 prohibition of the use of heavy metals
• Hyundai/KIA MS 201-02 § 3.3 / DIN EN 62321 - Determination of PBDE (polybrominated diphenyl ethers) in polymers by GC-MS Prohibition and notification of the use of harmful substances - parts and metals - § 3.3: Brominated flame retardant restricted PBDE in the USA' Prohibition of (Poly Brominated Diphenyl Ethers)
• Hyundai/KIA MS 210-05 § 4.3.1 - Heat cycle resistance test by infrared irradiation Molded plastic parts - Internal; § 4.3.1: Heat cycle resistance test
• Hyundai/KIA MS 210-05 § 4.5 - Fading resistance test Molded plastic parts - Internal; § 4.5: Fading resistance test (Method: Xenon Arc - equipment according to ISO 105)
• Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Indoor use; § 4.7: Chemical resistance test
• Hyundai/KIA MS 210-05 § 4.7 - Chemical resistance test Molded plastic parts - Internal; § 4.7: Chemical resistance test
• Hyundai/KIA MS 210-05 § 4.8 - Wear resistance Molded plastic parts - Indoor use; § 4.8: Wear resistance
• Hyundai/KIA MS 210-05 § 4.9 - Scratch resistance Molded plastic parts - Indoor use; § 4.9: Scratch resistance test
• Hyundai/KIA MS 210-05: Molded Plastic Parts - Interior
• Hyundai/KIA MS 210-06 § 4.4.2 - Weatherproofing test Molded plastic parts - Outdoor use § 4.4.2 Artificial Weathering test
• Hyundai/KIA MS 210-06: Molded Plastic Parts - Outdoor Use
  
  Hyundai/KIA MS 211-45. Polyamide 6 (GF, MF Reinforced)
• Hyundai/KIA MS 211-47: PA66 Oil guide connector radiator inlet/outlet tank // Hydro engine mounting nozzle
• Hyundai/KIA MS 211-54: PA6, PA66 Wheel cover
• Hyundai/KIA MS 213-28: Talc Filled Polypropylene
  
  Hyundai/KIA MS 213-42: Scratch Resistant PP Copolymer - Injection Molded Interior and Exterior Parts
  
  Hyundai/KIA MS 220-04: TPO - Side Sill Molding and Waist Line Molding for Exterior TPO - Side Sill Molding and Waist Line Molding for Exterior
• Hyundai/KIA MS 220-07: Olefin System Elastomer
  
  Hyundai/KIA MS 252-08: Cross-Linked Polyethylene Foam Sheet, Interior trim pad
• Hyundai/KIA MS 256-31 § 5.2 - Peel strength, Line isolation pad kit; § 5.2: Peel strength
• Hyundai/KIA MS 257-07: Soft Urethane Molding Foam - Seat Soft urethane molding foam mainly for use in automotive cushion material
• Hyundai/KIA MS 257-07: Soft Urethane Molding Foam - Seat
• Hyundai/KIA MS 269-03: Standard for Vulcanized Elastomer Compounds
• Hyundai/KIA MS 300-08 - Flame resistance, Flammability resistance - Interior materials
• Hyundai/KIA MS 300-11 - Friction resistance Method for testing the resistance of materials such as vinyl, genuine leather and luggage compartment mats to friction
• Hyundai/KIA MS 300-31 § 4.12.1/.2 - Fade resistance test Standard Test Methods - Leather, A/Leather and Sheet § 4.12.1 + 4.12.2: Fastness Test
• Hyundai/KIA MS 300-31 § 4.13 - Standard Test Methods for Adhesion - Leather, A/Leather and Sheet § 4.13: No Adhesion
• Hyundai/KIA MS 300-31 § 4.19 - Abrasion resistance (Taber Abraser) Standard Test Methods - Leather, A/Leather and Sheet § 4.19: Abrasion Resistance
• Hyundai/KIA MS 300-31 § 4.27 - Determination of seam strength Standard Test Methods - Leather, A/Leather and Sheet § 4.27 Seam Strength
• Hyundai/KIA MS 300-31 § 4.3 - Thickness Standard Test Methods - Leather, A/Leather and Sheet § 4.3: Thickness
• Hyundai/KIA MS 300-32 § 4.14.1 - Standard Test Method for Fading Fastness - Woven, Knitted
• Hyundai/KIA MS 300-32 § 4.9.1 - Seam strength
• Hyundai/KIA MS 300-32: Standard test method - Woven, knitted, Mainly for woven fabrics and knits for use in automotive seat covers and interior trim linings.
• Hyundai/KIA MS 300-34 - Odor test, Odor test method for interior materials
• Hyundai/KIA MS 300-34 - Odor test, Odor test method for interior materials
• Hyundai/KIA MS 300-35: Standard Test Method - Carpet
• Hyundai/KIA MS 300-51 - Determination of grease content and pH value, Test Methods Oil Content and pH for Genuine Leather
• Hyundai/KIA MS 300-54 - Fogging (light transmittance), Standard Test Method - Fogging
• Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds, Test method for determination of VOC emission from vehicle part
• Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC), Test method for determination of VOC emissions from vehicle interior parts
• Hyundai/KIA MS 300-55 (Detailed Analysis) - Determination of volatile organic compounds (VOC), Test method for determination of VOC emissions from vehicle interior parts
• Hyundai/KIA MS 300-55 § 4.2 - Formaldehyde Determination, Test method for release of volatile organic compounds; §4.2: Formaldehyde measurement
• Hyundai/KIA MS 300-55 § 4.4.2 - Organic substances and emissions with TDS-GC-MSD Volatile Organic from Vehicle Interior Components
  Determination of Compounds; §4.4.1: Determination of VOC and aldehydes from the part using the thermal desorption analysis method
• Hyundai/KIA MS 300-57 - Determination of VOC emission in 1 m³ test chamber Test method for VOC emission from part assembly
• Hyundai/KIA MS 320-05: Seat Fabrics Fabrics for automotive seat cover
• Hyundai/KIA MS 322-05 § 3.5 - Tear strength, Natural Leather - Laminated Soft Upholstery; Tear Strength
• Hyundai/KIA MS 322-05 § 3.6 - Peeling strength, Natural Leather - Laminated Soft Upholstery; peeling strength
• Hyundai/KIA MS 322-05 § 4.13.1 - Chemical Resistance - Abrasion Test Genuine Leather - Interior Upholstery; Chemical Resistance - Abrasion Test
• Hyundai/KIA MS 322-05 § 4.13.2 - Chemical resistance - Drop test Genuine Leather - Interior Upholstery; Chemical resistance - Drop test
• Hyundai/KIA MS 322-05 § 4.14 - Sunscreen lotion resistance, Genuine Leather - Interior Upholstery; sunscreen lotion resistance
• Hyundai/KIA MS 322-05 § 4.15 - Water resistance, Genuine Leather - Interior trim; water resistance
• Hyundai/KIA MS 322-05 § 4.5 - Tear strength, Genuine Leather - Interior trim; Tear Strength
• Hyundai/KIA MS 322-05 § 4.6 - Peeling strength, Genuine Leather - Interior trim; Peel Strength
• Hyundai/KIA MS 322-05: Genuine Leather - Interior Trim e.g. door trim, crash pad, console
• Hyundai/KIA MS 322-05: Natural Leather - Laminated Soft Upholstery, e.g. door trim, crash pad, console
• Hyundai/KIA MS 322-06: Premium leather - steering wheel and horn pad Genuine leather used in the interior is often used in the manufacture of steering wheels and horn protectors.
• Hyundai/KIA MS 330-03: Cotton Mat - Seat Cotton mat for seat cushion and backing material for vehicle
• Hyundai/KIA MS 343-11: Wallpaper
  
  Hyundai/KIA MS 600-35 § 6.20 (SAE J2527) - Test Methods for Lightfastness (Outer) Coatings and Coating Films
• Hyundai/KIA MS 600-35: Prüfverfahren für Beschichtungen and Beschichtungsfolien
• Hyundai/KIA MS 611-15: Electroplated Zinc and Zinc Alloy Plating (Trivalent Chromate)
• Hyundai/KIA MS 652-12 § 5.4 - Scratch resistance test, Soft touch painting - Internal plastic parts; § 5.4: Scratch resistance test
• Hyundai/KIA MS 652-12: Soft Feel Paint - Interior Plastic Parts
• Hyundai/KIA MS 652-14 § 5.23.1 - Abrasion resistance, Flat surface, Painting - Hard thermoplastic parts; § 5.23.1: Abrasion resistance, flat surface
• Hyundai/KIA MS 652-14: Painting - Hard thermoplastic parts
• Hyundai/KIA MS 655-08 § 4.21.1 - Wear resistance for smooth surfaces, Paint - hard thermoplastic parts; § 4.21.1: Wear resistance for flat surfaces
  
  Hyundai/KIA MS257-06: Urethane upholstery foam - For use in cushion and lining material of interior seats
• Hyundai/KIA MS322-04: Genuine leather - Seat cover applies to genuine leather used as automotive seat cover
• Hyundai/KIA Softening point - Determination of softening point of laminates, eg Hyundai/KIA MS 320-11 § 4.14
• Hyundai/KIA MS 300-32 § 4.23.2 Gear power, General method for determining gear shift power, for example Hyundai/KIA MS 300-32 § 4.10