EUROLAB laboratory provides testing and compliance services within the scope of NES M0094 standard. The NES M0094 test covers the measurement of the flammability of automotive interior materials. As EUROLAB, we provide the best service to you, the manufacturers, in the flammability test of automotive interior materials.
The sample will be cut from the product. 3 lines are drawn on the reverse side. Corners are cut to facilitate the assembly of the equipment. If the test piece is difficult to remove due to the shape of the piece, an equivalent test piece can be used. To reach the line for samples exceeding the burn time of 300 seconds, a line is drawn to the position where the burn time exceeds 300 seconds. Burn time is then measured to the line.
If a flat test piece cannot be cut due to the shape of the piece, it is cut from any area no thicker than 12,7 mm at any point. If the length or width of a test piece is less than the specified dimensions, the maximum available width or length is used.
If the surface material consists of more than two material types and is fully bonded or fused, the material will be considered composite material and used as is.
If the surface material consists of more than two types of material and is neither fully bonded nor fused, the test pieces shall be cut separately and not more than 12,7 mm thick.
Material thicker than 12.7 mm shall be cut to a thickness of 12,7 mm from the exposed cabinet interior surface for use as a test piece. A piece adhered to and attached to the body panel will be scraped with a scraper and used as a test piece.
The flammability varies with the sampling direction as well as the color of the test pieces. Therefore, preliminary tests for sampling direction and color should be made. The most flammable test pieces will be used.
EUROLAB laboratory provides the best service to you, our manufacturers, with its experienced and professional staff for NES M0094 testing within the scope of all automotive standards.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
EUROLABreporting and certification activities, United Accreditation Foundation (UAF), Turkish Accreditation Agency (TÜRKAK) ve Enterprise Accreditation Foundation (EAF) based on the accreditation provided by the accreditation body. The Enterprise Accreditation Foundation (EAF) accreditation body is also a signatory of the United Nations (UN GLOBAL COMPACT) organization.
