BMW AG Automotive Components Tests

EUROLAB Laboratory provides a complete automotive solution including all requirement from chemical analysis to mechanical and environmental testing for automotive parts of automotive materials, component parts, component parts, composites and surrogate plates used in passenger cars, multipurpose passenger cars, trucks and buses according to BMW AG manufacturing standards. Offers a range of testing services. BMW AG is a German multinational company currently producing cars and motorcycles.

EUROLAB supports developers and manufacturers of automotive materials with expertise in plastics, composites, components and metals. EUROLAB experts in the field of automotive materials understand the behavior and properties of automotive materials and have the latest laboratory equipment and techniques.

• Automotive Materials Weathering Test
• Chemical Testing and Analysis
• Permanent function test
• Final product inspection of automotive components
• Polymers and Plastics
• Nondestructive Testing (NDT) Services
• Quality control
• Automotive Materials Test
• Environmental exposure (-45 °C to 177 °C)
• Automotive Volatile Organic Compound (VOC) Test
• Approval test

We provide the following test services within the scope of BMW AG automotive components tests.

AA-0026 Aging resistance test
AA-0053 Sunscreen resistance of interior painted parts
AA-0054 Resistance of Coatings to Car Washing Machines
AA-0055 Chemical resistance test of surfaces
AA 0061 Determination of formaldehyde emission from non-metals
Emission from non-metallic materials and components, determination of formaldehyde using AA-0061 HPLC
AA-0079 Determination of multi-impact stone chip resistance
AA-0101 Reflectometer value (bright)
AA-0129 Cass Test ( Copper chloride-acetic acid salt spray test)
Dry scratch resistance test using AA-0134 Crockmeter
AA-0136 Pressurized Water Spray Resistance Test (Steam Spray Test)
AA-0161 Color Measurement in Body and Suspension Parts
Filiform Corrosion in AA-0168 Coated Aluminum
AA-0169 Outdoor wear test
AA-0171 Outdoor weathering of pavements in Florida, USA
Galvanostatic Cathodic Polarization Corrosion Short-Term Test on AA-0175 Coated Steel
AA-0180 Cross hatch test
AA-0187 Low temperature adhesion test with bowl drop test on process materials
AA-0203 Hydrolysis test
AA-0213 Condensate Water Constant Atmosphere Test
AA-0224 Cyclic corrosion test
AA-0235 Accelerated weathering crack stability
AA-0236 Accelerated weatherproof color stability
AA-0244 Paint Compatibility Test
AA-0246 Placing test specimens in corrosion test
AA-0257 Structure and gloss measurement on painted surfaces
AA-0264 Multi-stone chip test with salt water exposure
AA-0324 Salt spray - Test
AA-0326 SCAB corrosion test
AA-0328 Peel resistant adhesive tape
AA-0340 Bonding with scalpel cap
AA-0354 Technical Understanding of Color Measurement and Measurement of Test Panels for Initial and Serial Release
AA-0365 Control of adhesion force for 4657 gray tape for adhesion test
AA-0403 Visual Color Comparison and Metamerism Test
AA-0469 Corrosion test oils
AA-0471 Abrasion Resistance with Abrex Test Equipment
AA-0570 Wear resistance flock
AA 2.3-015 Bioindicatoren (Schrauben, Schläuche, Edelstahlplättchen), Prüfanschmutzungen
AA 4-003 Kernprozess Geotechnik im Tätigkeitsfeld Materialbegutachtung
AA-C 166 Emissions test
AA-P 175 Cyclic Corrosion Test
AA-P 184 Salt spray test
AA-P 187 Multi-stone chip test with salt water exposure
AA-P 192 Determination of multi-impact stone chip resistance
AA-P 224 Condensate Water Constant Atmosphere Test
AA-P 275 Aging resistance test
AA-P 276 Temperature cycle test
AA-P 277 Humidity / Low Temperature Load
BMW 8 121 649.6 Features Safety Net
BMW 9 170 596,6 Index B / PR 080.3 § 4.3.2 Overvoltage test (seat heater only)
BMW AA-0026 / Outdoor Aging resistance test
BMW AA-0026 / Exterior Aging resistance test
BMW AA-0026 / Indoor Aging resistance test
BMW AA-0053 Sunscreen resistance
BMW AA-0054 Resistance to car washes
BMW AA-0055 Chemical resistance test of surfaces
BMW AA-0055, Test Method 1 Media resistance, fuel resistance
BMW AA-0055, Test Method 2 Media resistance
BMW AA-0055, Test Method 3 Media resistance
BMW AA-0055, Test Method 4 Media resistance
BMW AA-0055, Test Method 5 Media resistance
BMW AA-0055, Test Method 7 Media resistance
BMW AA-0055, Test method 8 Acid-heat-alkali resistance (SWA test)
BMW AA-0055, Test method 1 Chemical resistance, fuel resistance
BMW AA-0055, Test method 2 Chemical resistance
BMW AA-0055, Test method 3 Chemical resistance
BMW AA-0055, Test method 4 Chemical resistance
BMW AA-0055, Test method 5 Chemical resistance
BMW AA-0055, Test method 7 chemical resistance
BMW AA-0055, Test method 8 Acid-Heat-Alkali resistance test (SWA test)
Determination of BMW AA-0061 Formaldehyde emission
BMW AA-0079 Determination of multi-impact stone chip resistance
BMW AA 0081 single impact test
BMW AA-0101 Brightness measurement
BMW AA-0129 Cass test (copper chloride-acetic acid salt spray test)
BMW AA-0134 Dry scratch resistance test
BMW AA-0136 Steam boost test
BMW AA 014 Color measurement (CIELAB)
BMW AA-0180 Cross hatch test
BMW AA-0203 Hydrolysis Test
BMW AA-0213 Condensate constant atmosphere test
BMW AA-0224 Cyclic Corrosion Test
BMW AA-0235 Accelerated aging
BMW AA-0256 Thickness and Weight Measurement
BMW AA-0257 Structure and gloss measurement
BMW AA 0264 Multi-stone chip test with salt water exposure
BMW AA-0264 Multiple rock cutting with brine storage
BMW AA-0324 Salt spray test
BMW AA-0340 Scalpel cut
BMW AA-0349 Stackability
BMW AA-0354 Color Measurement
BMW AA-0403 Visual Color Comparison and Metamerism Test
BMW AA-0412 Wear resistance
BMW AA-0419 Painting Behavior and Cleaning Ability
BMW AA-0420 Hydrolysis in Leather
BMW AA-0471 Wear Resistance with ABREX Test Equipment
BMW AA-0547 Determination of the thickness of the mass per unit area and the effective pile and sewing speed
Bending stiffness according to BMW AA-0551 DIN 53121
BMW AA-0551 a DIN 53121 Biegesteifigkeit at Anlehnung
BMW AA-0563 Repeated yawning
BMW AA-0565 Shrinkage Test
BMW AA-0566 Penetration Behavior Leather
BMW AA-0567, Color fastness to sweat, acidic, alkaline
BMW AA-0567, alkaline Color fastness to perspiration - alkaline
BMW AA-0567, acidic Color fastness to sweat - acidic
BMW AA-0568 Dimensional stability
BMW AA-0570 Wear resistance of flocked plastic parts
BMW AA-0602 Pressure sensitivity in floor filler
BMW AA-0602 Pressure sensitivity Pressure sensitivity on filler
BMW AA-0602 Compression kit Compression kit on filler
BMW AA 0616 weight change with contact storage
BMW AA-0616 Weight change with ignition retainer
BMW AA-C 166 Determination of Amines
BMW AA-N 040 Determination of the thickness of the mass per unit area and the effective pile and sewing speed
BMW AA-N 043 Wear resistance of flocked plastic parts
BMW AA-N 067 Bending stiffness
BMW AA-N 53121 based on DIN 067 bending stiffness
BMW AA-N 071 Dyeing behavior and cleaning ability of leather
BMW AA-N 071 / Condition of delivery Coloring behavior and cleanability of the leather (Martindale)
BMW AA-N 071 / Hydrolysis cleaning after storage Leather can be cleaned
BMW AA-N 071 / lightfast cleaning after aging Leather can be cleaned
BMW AA-P 107 Brightness measurement
BMW AA-P 124 Visual color comparison and metamerism test
BMW AA-P 177 Cross hatch test
BMW AA-P 192 Multi-impact stone chip resistor
BMW AA-P 194 Chemical resistance
BMW AA-P 194, test method 1 ambient resistance, fuel resistance
BMW AA-P 194, test method 2 ambient resistance
BMW AA-P 224 Condensate constant atmosphere test
BMW AA-P 257 Resistance of painted parts to suntan lotion
BMW AA-P 259 Mar resistor (Crockmeter)
BMW AA-P 260 Accelerated weather conditions
BMW AA-P 275 Aging resistance test
BMW AA-P 276 Temperature cycle test
BMW AA-P 290 Steam boost test
BMW AA-P 296 Wear resistance using Abrex test equipment
BMW AA-P 308 hydrolysis test
BMW AA-P 319 scalpel cut
BMW GS 90010-1 type surface protection for metallic materials - standard parts, drawing parts
BMW GS 90011 Coating of parts made of metallic materials through organic materials, requirements and tests
BMW GS 93008-4 Related articles - Materials and components - Components and emissions
BMW GS 93010-2 Elastomers - Test procedures
BMW GS 93010-2 § 7.6.1.1 Bending stress at low temperatures ("R" index)
BMW GS 93011-3 Identification of removable materials
BMW GS 93011-4 Thermogravimetric analysis (TGA)
BMW GS 93011-5 Low temperature standard value
BMW GS 93011-6 Pyrolysis IR
BMW GS 93011-7-A Paint apathy; Method A: contact discoloration and environmental discoloration due to transition
BMW GS 93011-7-B Paint apathy; method B: purification effect
BMW GS 93011-8 Resistance to stress cracking
BMW GS 93011-9 Bending test at low temperature
BMW GS 93012-1 Elastomers - Heat aging
BMW GS 93012-2 Elastomers - Determination of resistance to test oils
BMW GS 93012-4 Elastomers - Determination of resistance to coolants
BMW GS 93012-5 Elastomers - Determination of resistance to brake fluids
BMW GS 93012-6 Elastomers - Determination of resistance to test grease
BMW GS 93026-1 Interior textiles - Requirements and tests
BMW GS 93026-1 § 5.1.3 Water stain fastness
BMW GS 93034 Cold cure adhesives - Key features
BMW GS 93036 Lightly Reinforced Thermoplast (LWRT) on the exterior
BMW GS 93039 PVC artificial leather for upholstery area - Requirements and tests
BMW GS 93042 Thermoplastic Elastomers (TPE), Requirements and Tests
BMW GS 93043 Soft foam materials - Description, requirements and tests
BMW GS 93045 Decorative interior surfaces - Requirements and tests
BMW GS 93048 Particulate foam foils for trim parts, requirements and tests
BMW GS 93052-1 Exterior unpainted plastic surfaces - Thermoplastics
BMW GS 94007 Coatings on plastic parts - Painted plastic parts, requirements and tests
BMW GS 95003-5 Chemical requirements electronics
BMW GS 95011-3 protective coating electronics
BMW GS 95024-1 Electrical and electronic components in motor vehicles. General Requirements
BMW GS 95024-3-1 Electrical and electronic components in motor vehicles - Environmental requirements and tests
BMW GS 97012 Trim parts with PVC slush coating
BMW GS 97013 Trim parts with PUR-Sprayskin coating - Delivery and test conditions
BMW GS 97014-2 Emission measurement in SHED rooms (CARB test)
BMW GS 97014-2 based on emission measurement in SHED rooms (CARB test)
BMW GS 97014-2 (CARB test) including CARB scan emission measurement in SHED rooms
BMW GS 97014-3 Emission measurement with air exchange in the test room (summer test)
BMW GS 97014-4 Determination of olfactory behavior
BMW GS 97017 Coatings on plastic parts - Electroplated plastic parts - Requirements, tests
BMW GS 97017 § 5.6 Russian mud test
BMW GS 97034-1 Manual wear test (Abrex)
BMW GS 97034-2 Nail test
BMW GS 97034-3 Shoe sole test with Abrex tester
BMW GS 97034-4-A Colored abrasive
BMW GS 97034-4-B Color wear behavior (Crockmeter)
BMW GS 97034-4-C Color wear behavior (Veslic)
BMW GS 97034-5-A Resistance to cleaning agents (Abrex)
BMW GS 97034-5-B Resistance to cleaning agents (Crockmeter)
BMW GS 97034-5-C Resistance to cleaning agents (Veslic)
BMW GS 97034-6-A Soiling behavior and cleaning ability (Abrex)
BMW GS 97034-6 B Soiling behavior and cleaning ability (martindale)
BMW GS 97034-6-B Soiling behavior and cleaning ability (Martindale)
BMW GS 97034-7 Drop test
BMW GS 97034-8 Determining the slope of the scratch
BMW GS 97034-8 at Anlehnung Bestimmung der Schreibneigung
BMW GS 97034-9 Scratch test
BMW GS 97034-9 at Anlehnung Kratzprüfung
BMW GS 97036 DMA
BMW GS 97038 Flammability test for automotive applications
BMW GS 97045-2 Painted plastic parts in the exterior, interior and engine compartment
BMW GS 97050 Trim parts with IMC-TPU-Slush coating
BMW GS 97069 Soundproofing components in motor vehicles, Adhesive strength test
BMW GS 97079 Coatings on plastic parts - Painted and painted plastic parts on motorcycles - Requirements and tests
BMW GS 97102 PVD coatings on stainless steel surfaces and chrome surfaces
BMW LH 10121464-000-03 Requirement Specifications - Sound Insulation Engine Compartment
BMW LH 10304977-000-04 Luggage compartment trim
BMW LH 10304977-000-06 Luggage compartment trim
BMW LH 10358294-000-05 Requirements Specification UBV MAS Rear Diffuser
BMW LH 10358740 Tailgate
BMW LH 10437233-000-03 Luggage trim panels G 32
BMW LH 10506573-000-02 Requirements specification - G01 - Floor covering, spacer, footrest
BMW LH 10506583-000-02 Injection molded components for the following trim parts
BMW LH 10511919-000-01 F45 Luggage compartment trim
BMW LH 10513190-000-02 Requirement Feature - Sound Insulation Engine Compartment
BMW LH 10518160-000-04 Requirement specifications - Luggage compartment cover
BMW LH 10541649-000-02 Requirements Specification - G20 - Floor covering, inserts, footrest
BMW LH 10584675-000-02 Requirement Specifications - Rear heating duct front
BMW LH 10608151-000-03 Requirement specifications - Luggage compartment G05
BMW LH 10617891-000-01 Lastenheft - G20 - Ablegeboden and Anbauteile
BMW LH 10709580-000-01 Requirements Specification - G2x Jet Wiper Request for Development
BMW LH 10824701-000-01 First Aid Kit
BMW LH 11014253-000-01 Requirements Specifications Wheelhouse Cover
BMW N 600 91.0, Teil 33 Paints, special requirements for painting plastic parts
BMW N 603 00.0 Teil 4 Weiche Schaumstoffe - Prüfverfahren and zulässige Toleranzen
BMW PA-N 150 Effective pile mass and thickness and stitch rate per unit area
BMW PA-P 028 Cross hatch test
BMW PA-P 100 Brightness measurement
BMW PA-P 208 Condensate constant atmosphere test
BMW PA-P 230 Aging resistance test
BMW PA-P 231 Temperature cycle test
BMW PA-P 250 Visual Color Comparison and Metamerism Test
BMW PA-P 295 Paint Compatibility with Sunscreen Lotion
BMW PA-P 315 Wear resistance using Abrex test equipment
BMW PR 100 § 2.8.3.1 Hardness test
BMW PR 100.3 PR opening A-, B-, C- and D-pillar
BMW PR 100.4 Trim panels A-, B-, C- and D-pillar
BMW PR 100.6 Trim panels A-, B-, C- and D-pillar
BMW PR 102.4 § 2.4.3 Air permeability
BMW PR 102.6 Headliner with attachments
BMW PR 102.7 Headliner with attachments
BMW PR 104 § 2.6.4.5 Endurance test
BMW PR 104.3 Test specification - Rear rack with attachments
BMW PR 104.4 Test specification - Rear rack with attachments
BMW PR 104.5 Rear shelf with attachments
BMW PR 121.2 Painting and Cleanability
BMW PR 121.3 Painting and Cleanability
BMW PR 121.4 Soiling behavior and cleaning ability of surface materials
BMW PR 209 PR Blende Einstieg
BMW PR 211 TS Tailgate
BMW PR 212 TS Spindle-driven automatic tailgate (SA316)
BMW PR 213 TP Hood
BMW PR 220 Determination of dent resistance
BMW PR 223.2 Buckling Strength / Determination of Buckling Strength
BMW PR 226 Cover windscreen panel
BMW PR 231 (Kalahari mode) - Weatherproof, dry-hot climate (eg Kalahari, Arizona, South America)
BMW PR 282 PR Coating Türen
BMW PR 292 PR Underbody Attachments
BMW PR 292 § 2.1.20 Pyrolysis-GC/MS
BMW PR 303.4 Climate cycle test
Climate change testing for BMW PR 303.5 Hardware parts
BMW PR 306.4 Sun simulation
BMW PR 306.4 c Sun simulation
BMW PR 306.5 BMW PR306.5 solar test trim parts. Environmental test, Solar simulation test.
BMW PR 306.5, part of a Sun simulation
BMW PR 306.5 part b Sun simulation
BMW PR 306.5 part c Sun simulation (behind horizontal glass panel)
BMW PR 306.5 part d Sun simulation
BMW PR 306.5 part e Sun simulation
BMW PR 306.5 part f Sun simulation (complete vehicle)
BMW PR 306.5, Sonnen Simulation Teil
BMW PR 306.5, Teil b Sonnensimulation
BMW PR 306.5, Teil c Sonnensimulation (hinter waagrechter Scheibe)
BMW PR 306.5, Teil d Sonnensimulation
BMW PR 306.5, Teil e Sonnensimulation
BMW PR 306.5, Teil f Sonnensimulation (Gesamtfahrzeug)
BMW PR 307.4 Evaluation of the susceptibility of component surfaces to scratches
BMW PR 307.4 § 2.1 Gloss test
BMW PR 307.4 § 2.2 Cutting test
BMW PR 307.4 § 5.1 Abrasion test with steel wool
BMW PR 307.4 § 5.3 Drop test
BMW PR 308.1 Climatic testing of adhesive joints
BMW PR 308.2 Climate test for bonded joints and composite materials in trim parts
BMW PR 309.1 Test specification - Vibration test for equipment components
BMW PR 311.2 Measurement of irritating noise (rattle/squeak) for components and the overall vehicle
BMW PR 326.5 TS Vehicle door
BMW PR 327.1 Electric side roller sun visors
BMW PR 341 TR Front / Rear Bumper
BMW PR 345 TS Rocker panel / Running board
BMW PR 357 Dimensional stability
Wear using the BMW PR 360 Taber
BMW PR 362 Determination of volatile substances in skin (moisture measurement)
Cleanability after contamination with BMW PR 363.1 Smoked Flour and Decoration and Wall Sand
BMW PR 364 water capillary
BMW PR 368 sewing power
BMW PR 372 § 2.1.6.1 Weight load static
BMW PR 372 § 2.1.6.2 Weight loading dynamics
BMW PR 372 §2.1.7.1 hardness test
BMW PR 372.3 Plastic parts on the boot and passenger compartment floor
BMW PR 372.3 § 2.1.6.2 Gewichtsbelastung dynamic
BMW PR 372.3 §2.1.7.1 Steifigkeitstest
BMW PR 375.2 Textile linings and soundproofing in the luggage compartment
Textile trim panels in the trunk of the BMW PR 375.4
BMW PR 375.5 Textile trim components in the luggage compartment
BMW PR 376.1 Lashing / stowing elements and mountings in the trunk
BMW PR 380.4 Floor Mats
BMW PR 381.4 Floor covering
BMW PR 384.1 breathing test
BMW PR 387.1 Sealing side frames
BMW PR 388 Engine Compartment Sound Insulation
BMW PR 389.1 Passenger compartment SI and trunk SI - Test specifications
BMW PR 397 Rotting Consistency
BMW PR 399 Edge Yarn pulling force
BMW PR 401 Felt trend
BMW PR 501 Part 1 jar test
BMW PR 501 Part 2 desiccator test
BMW PR 506 fingerprint test
Surface stability of BMW PR 510 Gear knob buckles
BMW PR 512 Finger nail test
BMW PR 556 drop test
BMW PR / TS 208 TS Trims and trim strips in the door area and side frame
BMW PR/TS 209 TS Threshold terminator
BMW PR TS 224 TS Scratch resistance of unpainted plastic components
BMW PR/TS 228 Test Specification A-pillar molding / roof channel molding
BMW PR/TS 282 TS Coated doors
BMW PRV 152 Engine compartment shield and underbody panels with or without foam support
BMW PRV 152 § 2.4 media resistance
BMW PRV 311.1 Dimensional stability
BMW QS 52009 QS PUR foam soft seat, backrest and headrest; motorcycle seat rows
BMW QV 51061 § 3.3.1 Resistance to textile abrasion
BMW QV 51061 § 3.3.2 Window glass edge wear
BMW QV 51061 § 3.3.5 Abrasion resistance of anti-friction coating, material sliding on abrasive cloth
BMW QV 51061 § 3.5 Peel off after icing
BMW QV 51241 QS for underfloor trim, under-hood protection, wheel arches (injection-molded and non-woven) and air guides
BMW QV 52009 PUR foam, soft, seat, backrest and headrest cover; motorcycle seats
BMW QV 52009 T1 Soft PUR foam, seat, backrest and headrest cover
BMW QV 72003 Part 1: Seat belts for ECE, EG, US / Part 1 - belt
BMW S 603 00.0 Part 4 Soft cellular materials - Test procedure and allowable tolerances
BMW Features 2 754 531.6 Carpet footwell mat 2
BMW Features 8 165 341.6 Carpet footwell mat 1
BMW 1 848 495,6 TL Features Fiber Polar Sound Insulation
Weaving of BMW 1 932 797.6 TL Spec
BMW TL2 754 531.6 TL Hochflor Teppicheinlegematte 2
BMW TL6 951 680.6 Tufting-Carpet Eurovelours 70
BMW 6 958 374,6 TL Technical Delivery Specification non-woven
BMW TL6 961 179,6 Features Soundproofing Light Weight Non Woven
BMW 7 028 459,6 TL Elastic band 2 (textile)
BMW TL 7 044 213.4 Features ABS+PC Recyclat
BMW 7 056 938,6 TL Features Supplementary Strip
BMW 7 065 938,6 TL Spec's Distance knit fabrics
PVC Artificial Leather for BMW TL7 069 008.6 Bellows
BMW TL7 117 860.6 Spec's Flat needle nonwoven 3
BMW 7117860.6 TL Spec's Flat needle nonwoven 3
BMW TL7 120 399,6 Upholstery filler '02
BMW TL7 145 612.6 TL Tufting-Teppich 2003
BMW 7 150 150,6 TL Tufted Carpet Eurovelours 91
BMW 7 289 355,6 TL Renewable Vegetables for Visible Carrier Materials
BMW TL7 302 281.6 Specifications - Allweather Floor Mat
BMW TL7 305 243.6 Features Shear dilour body 12
BMW TL7 311 282.6 Tufting-Carpet Velvet velvet height
BMW TL 7 334 912.6 Features PUR Artificial Leather 1
BMW TL7 340 490.6 Compression molded material 10
Knitted trim fabric of BMW 7 378 491 TL Spec - Boston
BMW 7 382 291.6 TL PVC Artificial leather 17
BMW 7 402 630.6 TL Features PVC Artificial leather 18 light quality, Grain 80
BMW TL7 411 703.6 Features "Verona" with PVC-Foam sheet core (80)
BMW TL7 411 705.6 TPO-Foam with "Verona" grain (80)
BMW TL7 411 853.6 Features PVC-Simitation leather optimized haptic vein Verona
BMW 7 422 824.6 TL Features PVC Artificial leather 22, standard quality Grain 80
BMW TL7 453 047.6 Spec's Shear diluent high body
BMW 7 458 TL 355,6 Specification PVC-Simitation leather, standard quality Grain Rail
BMW 7 458 TL 356,6 Specification PVC-Imitation leather light quality, Grain Ray
BMW 7 458 TL 357,6 Specification Haptics optimized for PUR artificial leather, Grain 80
BMW 7 478 TL 493,6 Sound insulation air conduction
Specifications of BMW 8 090 463 TL Knitted Trim Fabric Tacheny
BMW 8 116 999,6 TL Technical delivery specifications
BMW 8 121 649,6 TL Spec Safety net
BMW 8 127 520.6 TL Spec Sun-Protective knit fabric
BMW TL8 165 341.6 Carpet footwell mat 1
BMW TL8 171 142.6 tow rope
BMW 8 186 875.4 TL Features Knitted Tape
BMW 8 236 276.6 TL Luggage net PA
BMW 8 262 216,6 TL Features Ski Bags Material
BMW 9 149 156.6 TL Features PP-Glass fiber recycling
BMW 9 165 280,6 TL PVC Artificial leather 11
BMW 9 169 300,6 TL Spec's Leather all
BMW 9 192 340,6 TL Features Luggage net PP
BMW 9 199 920.6 TL PVC artificial leather 13
BMW 9 210 275,6 TL Spec's PVC Artificial leather 14 Grain 60
BMW 9 211 895.6 Technical Delivery Specification - Soundproofing lightweight non-woven (PP/PET)
BMW 9 221 359,6 TL Tufting-Carpet velvet velvet velor light
BMW TS 100.1 § 4.2 Decor sticking
GS 90011 Coating of parts made of metallic materials with organic materials
GS 93008-1+2+4 Related articles acc. GS 93008-1+2+4
GS 93011-2 Residue on ignition
GS 93011-3 Extractable substance determination
GS 93011-5 Low Temperature Standard Value
GS 93011-7 Paint apathy
GS 93026-1 Requirements textile car interior
GS 93036 Lightly Reinforced Thermoplast im Exteriuer
GS 94007 Requirements painted plastic parts
GS 94011 Test environment and ancillary test materials
GS95002 EMV
GS 95003-2 EMV
GS 95003-4 Climate requirements electronics
GS 95003-5 Chemical requirements electronics
GS 95011-3 Protective coating electronics
GS 95024-2-1 EMV
GS 95024-2-2 EMV
GS 95024-3-1 Environmental requirements electronics
GS 97003-1 Surface classification for painted motor vehicles
GS 97017 Coatings on plastic parts - Electroplated plastic parts
GS 97033 Requirements decorative surfaces interior
GS 97034 Manual wear test (ABREX)
GS 97034-1 Wear test
GS 97034-10 Scratch and abrasion test
GS 97034-2 nail test
GS 97034-3 Shoe sole test
GS 97034-4 Color wear behavior
GS 97034-5 Resistance to cleaners
GS 97034-6 Resistance to soil and cleaners
GS 97034-7 Drop test
GS 97034-8 scratch slope
GS 97034-9 scratch test
GS 97036 Dynamic mechanical analysis
GS 97038 flammability
GS 97045-2 Coatings on plastic parts -Painted plastic parts
GS 97058 Requirements self-adhesive labels
PR 0155-04 Moisture determination (plastics)
PR 0186-03 Hot storage (plastic)
PR 0187-04 Short term resource factor (plastics)
PR 121.2 Contamination and cleanability behavior
PR 209 Requirement threshold terminator
PR 231 Requirements door sealing
PR 292 Underbody attachments - gas chromatography / mass spectrometry (Pyrolysis-GC-MS)
PR 303.4 Climate change testing
PR 303.5 Climate change testing
PR 303.5 AD Climate cycle test
PR 307.4 scratch resistance
PR 308.1 Climatic testing of adhesive joints
PR 308.2 Climatic testing of adhesive joints and adhesive joints
PR 309 Vibration test
PR 321.4 Requirements instrument cluster
PR 357 Dimensional stability climate change test
PR 397 Rotting consistency
PR 506 fingerprint test
PR 556 Cream resistant thermoplastics
PR 557 Chemical resistance
Compatibility with PR 562 mounting aids
027 TL SR-Veredelte Eutektische Alsi-Legierungen; Werkstoffanforderungen
055 TL AlSiMg Alloy, Sr-Refined, Artificially Aged; Material requirements
1010 TL Interior Materials; Combustion Behavior, Material Requirements
1011 TL flammability vertical
1355 TL illegal Baustahl; Werkstoffanforderungen
Powder Coating for Cylinder Block and Crankcase Surface Protection Requirements
161 TL Painting of plastic exterior parts; Requirements and reviews by Porsche AG
$181 Chrome plated alloy wheels; Surface protection requirements
Inorganic Protective Coating Surface Protection Requirements On Aluminum Parts
187 TL Kugelzapfen nitrokarburiert-beschchtet ; Oberflachenschutzanforderungen
191 TL Paint coating on rear muffler ; Paint adhesion test
$196 Duplex Coating Systems for Small Parts and Bulk Parts; Surface Protection Requirements
203 TL Decorative Chrome Plating on Metal Components (Ni-Cr Coatings); Surface Protection Requirements
$207 Requirement reflection layers
211 TL Paint Coatings on Exterior Plastic Parts; Requirements
212 TL Oxide Coatings on Aluminum Parts; Surface Protection Requirements
214 TL Coating with Zinc-Powder Paint; Surface Protection Requirements
215 TL Electroplated Chrome and Nickel/Chrome Plates for Piston Rods; Surface Protection Requirements
216 TL Corrosion Protection in Half Shafts; Surface Protection Requirements
217 TL Zinc Coatings; Surface Protection Requirements
$218 Body Color Multi-coat Metallic Exterior Paint Body Components Requirements
222 TL Corrosion Protection Coatings for Brake Lines Surface Protection Requirements
226 TL Paint Works on Materials Used in Car Interior Upholstery Conditions
227 TL Single Coat Paint of Zinc Coated Metal Surfaces; Surface Protection Requirements
233 TL Non-Electrolytic Top Coat Zinc Flake Coatings; Surface Protection Requirements
238 TL Surface Protection, Steel Disc Wheels; Surface Protection Requirements
Surface Protection for Alloy Wheel Requirements
240 TL Thin Layer Zinc Phosphating ; Surface Protection Requirements
241 TL Gleitbeschichtungen für Schließsysteme ; Oberflachenschutzanforderungen
244 TL Zinc/Nickel Alloy Coatings; Surface Protection Requirements
245 TL Non-Electrolytic Zinc Flake Coatings; Surface Protection Requirements
256 TL Powder Coating on Metal Surfaces; Surface Protection Requirements
260 TL Painting Metal Surfaces; Surface Protection Requirements
261 TL Painting on Coil Springs; Surface Protection Requirements
262 TL Paint Coating of Chassis Parts; Corrosion Protection
$292 Requirements PVC foil
471 TL Seat Belt Systems and Height Adjustment ASSY ; Material and Functional Requirements
$496 Conditions door trim/side trim panel
52007 TL Requirements hot stamping foils
52013 TL Requirements PPE+PS
52018 TL Double-Sided Foam Adhesive Tape; Material Requirements
52035 TL Requirements PP/EPDM/PE
52038 TL Tags; Self-Adhesive, Material Requirements
Requirements PUR steering wheel foam
52062 TL Requirements PA 6.6, glass fiber reinforced
52064 TL Requirements leather
52065 TL Requirements elastomer seals
52068 TL Requirements EPDM coolant hose
52090 TL Requirements PP-EPDM, glass fiber reinforced
52146 TL Central Hydraulic System Fluid; Lubricant Requirements
52162 TL Automatic Transmission Fluid (ATF), which has reached the end of its useful life in the factory; Lubricant Requirements
52217 TL Aging behavior exterior parts
52221 TL Requirements PP
Adhesive Tape for Thermoplastic Elastomers and Elastomer Profile, Double-Sided Adhesive Adhesive or Heat Activable
Requirements molded headlining
52231 TL ABS and PC Polymer Mixtures; Material requirements
52254 TL Requirements for knitted fabrics with foam backing
52277 TL Requirements POM finished parts
52278 TL Requirements rubber floor mat
52283 TL Polypropylene, Elastomer Modified, Talc or Mineral Modified; Material requirements
52288 TL Polyamide, Mineral Reinforced, Finished Parts; Material requirements
52296 TL Requirements instrument cluster
52306 TL Requirements carpet
52311 TL Requirements graft polymers
52320 TL Requirements dampening sheets
52321 TL Requirements wooden parts
52345 TL Requirements body seals EPDM
52350 TL Requirements upper fabric can be converted
52361 TL Aramid coolant hose requirements
52388 TL Requirements PP
52394 TL Requirements melamine resin foam
52419 TL Requirements PP foil protective sill strip
52428 TL Decorative film with protective function - Component requirements
52437 TL Functional Coated Polycarbonate Headlight Outer Glasses; Material Requirements
52439 TL PA pipe requirements
52440 TL PA 6 glasfaserverstärkt, Fertigteile; Werkstoffanforderungen
52442 TL Requirements floor covering
52443 TL Heavy Duty Supported PP-Tufting - Material requirements
52447 TL Flocking of Interior Upholstery Material
Requirements for composite non-woven foam washers
Painting Metallic Decorative Inserts for Outdoor Requirements
52452 TL Polypropylene mit erhöhter Kristallinität ; Werkstoffanforderungen
52464 TL Rim Trim Elements ASSY Requirements
52473 TL Sunshade requirements
52476 TL Requirements POM
$526 Requirements soft PVC
52602 TL Requirements PU foam
52607 TL Requirements PUR spacers
52608 TL Requirements non-woven
52613 TL Requirements PET non-woven absorbent
52622 TL Thermoplastic Elastomers for Outdoor
$52625 Requirements plastic mounting support
52631 TL Test Scope for Material Data Sheets
52637 TL Requirements column cover/entrance sill
52639 TL Requirements PP
52649 TL Requirements wheel guard
52652 TL Requirements ASA-PC
52653 TL Requirements PU flexible foam
52660 TL Requirements within the scope of shield applications
52663 TL Requirements radiator grille
52671 TL PMMA, Glossy Coatings for Outdoor; Material requirements
52673 TL Requirements ASA+PA
$52674 High-gloss optics Test scope for components in foam-backed outer parts
52680 TL Components Made of Long Fiber Reinforced or Continuous Filament; Reinforced Plastic Composites (FRP); Materials and Component Requirements
52681 TL Requirements fuel filler pipe
52682 TL Requirements for parts in contact with the coolant
52685 TL Requirements Polyether-PUR soft foam
52690 TL Requirements PP outer parts
52693 TL Requirements mat
52694 TL Corrugated pipe requirements
527 TL ABS Graft Polymer, Finished Parts; Material requirements
52703 TL Requirements TPE gaskets
52704 TL EPDM Body Gaskets; Material requirements
52705 TL Soft touch tactile polypropylene for interior
52711 TL Underbody Panels Reinforcing CD
528 TL Chrome Plated Plastic Parts; Material Requirements
529/2 TL Requirements PUR
533 TL Hard PE requirements
533/1 TL Requirements PE container
534 TL Polyamide 6, Fertigteile; Werkstoffanforderungen
554 TL Requirements PET resin, glass fiber reinforced
$591 Organic glass requirements for lights
592 TL Reflective Coatings on Mirror Glass; Material requirements
669 TL Requirements PE finished parts
766 TL Brake fluid ; Material requirements
774 TL Ethylene Glycol Based Cooling Additive; Material requirements
778 TL Low Temperature Lubricating Grease; Lubricant requirements
80260 TL Fuel filter Functional Requirements
80286 TL Cooler Heat Exchanger ; functional requirements
82060 TL Fuel filter; functional requirements
82086 TL Refrigerant heat exchanger; functional requirements
82132 TL Charge Air Coolers; functional requirements
82316 TL R134a/R1234yf Refrigerant Lines; functional requirements
82406 TL Heater Cores; functional requirements
82436 TL Frontklappenscharnier ; Ein- und Mehrgelenk
82448 TL Flare Load Capacity, Reverse Bending Test
TL 825 12 / AK-LV 02 Airbag System - Airbag Cushions (Installation Location: Steering Wheel, Dashboard). Requirements and Test Conditions
82526 TL Fahrgelenke ; Anforderungen and Prüfbedingungen
874 TL radiator; functional requirements
934 TL Wiper Systems; Functional and Material Requirements
956 TL Exterior Lamps for Europe/USA/Japan; functional requirements
976 TL Windshield washer system requirements