USCAR Automotive Tests

Automotive Tests

USCAR Automotive Tests

The United States Automotive Research Council (USCAR) is the United States Council for Automotive Research LLC, a joint technology company of Ford Motor Company, General Motors, and Stellantis. The United States Automotive Research Council (USCAR) was founded in 1992. Its goal is to further strengthen the technology base of the US auto industry through joint research and development.

USCAR Automotive Tests

USCAR is governed by the three-member USCAR Council, which includes senior technology executives from each of the US automakers. Council members create value for their companies through their collective leadership. They establish USCAR policy, appoint representatives to various teams, and provide strategic direction and guidance to the organization.

EUROLAB Laboratory provides testing and evaluation services in the standards published by USCAR. These standards are listed below.

  • USCAR19-2 Coaxial Cable Connector Interface - Square Outer Conductor
  • SIZE AND PERFORMANCE SPECIFICATIONS FOR USCAR36-1 POST-MARKET GASOLINE ENGINE OIL FILTERS
  • USCAR12-6 ELECTRICAL CONNECTOR DESIGN REQUIREMENTS
  • PERFORMANCE CHARACTERISTICS FOR USCAR44-1 AUTOMOTIVE CABLE HOLDER CLIPS
  • ERGONOMICS FEATURES FOR USCAR47 MANUAL SEAT HOLDERS
  • USCAR10-3 Testing Both External and Internal Metric Threaded Fasteners to Evaluate Torque-Voltage Relationship
  • USCAR13-1 STANDARD FOR IN-TANK ELECTRIC FUEL PUMPS
  • USCAR32-1 NEW FINISH DEVELOPMENT DOCUMENT
  • TEST PROCEDURES FOR EVALUATION OF BOLT LOAD HOLDING OF USCAR35-1 MAGNESIUM ALLOYS
  • USCAR40-2 LEAD-FREE SOLDER VERIFICATION TEST PLAN
  • USCAR6-1 STANDARD FOR DC BRUSH MOTOR - HVAC BLOWERS
  • USCAR7-2 DEEMBRITLEMENT VERIFICATION TEST
  • USCAR39-1 STANDARD TIRE TRACEABILITY CONTENT AND RADIO FREQUENCY IDENTIFICATION (RFID) LABEL AND FORMAT FOR RELATED TIRE DATASET
  • USCAR11-2 TORQUE VOLTAGE TEST AND EVALUATION OF FITTINGS
  • USCAR33-1 SPECIFICATIONS FOR TESTING AUTOMOTIVE LED MODULES
  • SPECIFICATIONS FOR TESTING USCAR15-4 AUTOMOTIVE BULB SOCKETS
  • USCAR2-7 Performance Specification for Automotive Electrical Connection Systems
  • USCAR21-4 Performance Specification for Wire-to-Terminal Electrical Crimps
  • USCAR39 STANDARD TIRE TRACEABILITY CONTENT AND RADIO FREQUENCY IDENTIFICATION (RFID) LABEL AND FORMAT FOR RELATED TIRE DATASET
  • USCAR8-4 Grain Flow Model for Bolts and Screws
  • USCAR5-5 Preventing Hydrogen Embrittlement of Steel
  • USCAR45 Performance Specification for Welded Wire-to-Tele Splices
  • USCAR12-5 Electrical Connector Design Criteria
  • USCAR23-1 Road vehicles - 60 V and 600 V solid wires - Dimensions, test methods, and requirements
  • Performance Specification for USCAR44 Automotive Harness Retaining Clips
  • USCAR17-5 Performance Specification for Automotive RF Connector Systems
  • USCAR18-4 USCAR17 Supplement
  • USCAR38-1 Performance Specification for Ultrasonically welded wire terminations
  • ERGONOMICS FOR USCAR25-3 ELECTRICAL CONNECTIONS
  • USCAR25-2 Ergonomics Specification for Electrical Connections
  • USCAR12-4 ELECTRICAL CONNECTOR DESIGN CRITERIA
  • USCAR40-1 Lead-Free Solder Verification Test Plan
  • USCAR43 Shipping Caps, Torque Caps, and Stem Caps Ergonomic Design Criteria
  • USCAR41 Ergonomic Guidelines for Strollers and Strollers
  • USCAR42 Ergonomic Guidelines for Small Lot Delivery Operations
  • USCAR21-3 PERFORMANCE CHARACTERISTICS FOR WIRE TO TERMINAL ELECTRIC RED
  • USCAR4-1 Cigar Lighters and Electrical Sockets Standard
  • USCAR8-3 Grain Flow Model for Bolts, Screws, and Studs
  • USCAR24-2 USCAR INFLATION TECHNICAL REQUIREMENTS AND VERIFICATION
  • PERFORMANCE CHARACTERISTICS FOR USCAR17-4 AUTOMOTIVE RF CONNECTOR SYSTEMS
  • SPECIFICATIONS FOR TESTING USCAR33 AUTOMOTIVE LED MODULES
  • USCAR2-6 Performance Specification for Automotive Electrical Connection Systems
  • USCAR36 Size and Performance Specification for Aftermarket Gasoline Engine Oil Filters
  • USCAR1-2 SALT SPRAY TEST AND EVALUATION OF HOLDER SURFACES
  • USCAR7-1 DEEMBRITLEMENT VERIFICATION TEST
  • USCAR18-3 FAKRA SMB RF CONNECTOR ATTACHMENT
  • USCAR17-3 Performance Specification for Automotive RF Connector Systems
  • USCAR40 LEAD-FREE SOLDER VERIFICATION TEST PLAN
  • TEST FEATURES OF USCAR15-3 AUTOMOTIVE BULB SOCKETS
  • USCAR38 Performance Specification for Ultrasonically Welded Wire/Cable Termination
  • SPECIFICATIONS FOR TESTING USCAR3-3 AUTOMOTIVE MINIATURE BULBS
  • SPECIFICATIONS FOR TESTING USCAR34 AUTOMOTIVE LAMP SETS
  • USCAR12-3 WIRING COMPONENT DESIGN GUIDELINES
  • USCAR21-2 Performance Specification for Wire-to-Terminal Electrical Crimps
  • USCAR25-1 ELECTRICAL CONNECTOR INSTALLATION ERGONOMIC DESIGN CRITERIA
  • USCAR37 HIGH VOLTAGE CONNECTOR PERFORMANCE SUPPLEMENT SAE/USCAR-2
  • USCAR5-4 AVOIDING STEEL HYDROGEN FORCING
  • USCAR5-3 AVOIDING STEEL HYDROGEN FORCING
  • SPECIFICATIONS FOR TESTING A USCAR27 GAS PURGE LIGHT SOURCE SUBSYSTEMS
  • USCAR35 TEST PROCEDURES FOR EVALUATION OF BOLT LOAD HOLDING OF MAGNESIUM ALLOYS
  • USCAR2-5 Performance Specification for Automotive Electrical Connection Systems
  • USCAR10-2 TEST FOR EVALUATION OF TORQUE-VOLTAGE RELATIONSHIP OF BOTH EXTERNAL AND INTERNAL METRIC GEAR DEVICES
  • USCAR8-2 Grain Flow Model for Bolts, Screws, and Studs
  • USCAR32 NEW FINISH DEVELOPMENT DOCUMENT
  • USCAR11-1 TORQUE VOLTAGE TEST AND EVALUATION OF HOLDER SURFACES
  • USCAR30 PERFORMANCE SPECIFICATIONS FOR AUTOMOTIVE UNIVERSAL SERIES BUS (USB) CONNECTION SYSTEM
  • USCAR15-2 Specification for Testing Automotive Bulb Sockets
  • USCAR29 Automotive Grade Coaxial Cable Performance Specification
  • USCAR14-2 Specification for Testing Automotive Halogen Light Sources
  • USCAR28 Launcher Technical Requirements and Validation
  • USCAR1-1 Salt Spray Test and Evaluation of Fastener Coatings
  • USCAR15-1 Specification for Testing Automotive Miniature Bulb Socket/Circuit Plate Assemblies
  • USCAR17-2 Performance Specification for Automotive RF Connector Systems
  • USCAR24 Uscar Blow Molding Machine Technical Requirements and Verification
  • FIELD-RELATED LIFE TEST SUPPLEMENT TO USCAR20-1 SAE/USCAR-2
  • USCAR2-4 Performance Specification for Automotive Electrical Connection Systems
  • USCAR10-1 Testing Both External and Internal Metric Threaded Fasteners to Evaluate Torque-Voltage Relationship
  • USCAR21-1 Performance Specification for Wire-to-Terminal Electrical Crimps
  • USCAR15 Specification for Testing Automotive Miniature Bulb Socket/Circuit Plate Assemblies
  • USCAR26 Test Procedure for Electrical Ground Attachments
  • USCAR18-2 Fakra Smb Rf Connector Attachment
  • USCAR25 Electrical Connector Group Ergonomic Design Criteria
  • USCAR19-1 COAXIAL CABLE CONNECTOR INTERFACE – SQUARE OUTER CONDUCTOR
  • USCAR17-1 Performance Specification for Automotive RF Connector Systems
  • USCAR23 ROAD VEHICLES – 60 V AND 600 V SINGLE CORE (ISO/METRIC) CABLES – DIMENSIONS, TEST METHODS AND REQUIREMENTS
  • USCAR21 Performance Specification for Wire-to-Terminal Electrical Crimps
  • USCAR14-1 Standards for Testing Automotive Halogen Light Sources
  • USCAR17 Performance Specification for Automotive RF Connector Systems
  • USCAR19 Coaxial Cable Connector Interface - Square Outer Conductor
  • USCAR18 FAKRA SMB RF CONNECTOR ATTACHMENT
  • USCAR12-2 Wiring Component Design Guidelines
  • Supplement to USCAR20 Field Associated Life Test SAE/Uscar-2
  • USCAR2 Performance Standard for Automotive Electrical Connection Systems
  • USCAR14 Standard for Testing Automotive Halogen Light Sources
  • USCAR3A Standard for Testing Automotive Miniature Bulbs
  • USCAR13 STANDARD FOR IN-TANK ELECTRIC FUEL PUMPS
  • USCAR12 Wiring Component Design Guidelines
  • USCAR6 STANDARD FOR DC BRUSH MOTOR – HVAC BLOWER
  • USCAR10 Test to Evaluate Torque-Tension Relationship of Both External and Internal Metric Threaded Fasteners
  • Grain Flow Model for USCAR8 Bolts and Screws
  • USCAR9 CLASSIFICATION SYSTEM FOR AUTOMOTIVE TOOL, MACHINERY AND EQUIPMENT LOW VOC WATER BASED PAINT SYSTEMS
  • USCAR7 Fragility Removal Verification Test
  • USCAR4 STANDARD FOR LIGHTERS AND ELECTRICAL OUTLETS
  • USCAR5 Prevention of Hydrogen Embrittlement of Steel
  • USCAR3 Standard for Testing Automotive Miniature Bulbs
  • CRP-011 Truck Tire Characterization
  • USCAR1 Salt Spray Test and Evaluation of Fastener Coatings
  • CRP-010 SAE and ISO Noise Test Field Variability
  • CRP-008 Suggested Methods for Determining the Physical Properties of Polymeric Materials Exposed to Gasoline/Methanol Fuel Mixtures
  • CRP-007 Supplement to CRP-006 HFC134A Lubricant Study
  • CRP-004 Recommended Methods for Conducting Corrosion Tests on Gasoline/Methanol Fuel Mixtures
  • RCRA Regulatory Status of CRP-005 Air Bag Inflator/ Module Units
  • CRP-003 HFC-134a Lubricant Compatibility
  • CRP-001 Gasoline/Methanol Blends for Materials Testing
  • CRP-006 Addendum to HFC-134a Lubricant Study and HFC-134a Lubricant Study (CRP-007)

You can contact EUROLAB in the test and evaluation studies of the standards published by SAE and USCAR in automotive tests.

Get Offer Now

To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.

WhatsApp