Volkswagen SAE Automotive Tests

EUROLAB Laboratory offers a full range of automotive testing services, including all requirement, from chemical analysis to mechanical and environmental testing for automotive parts according to Volkswagen standards. EUROLAB provides accredited testing services to manufacturers, designers and all bidders in outsourcing in automotive laboratories to perform routine and non-routine automotive components, parts and full vehicle tests.

We provide the following test services within the scope of Volkswagen SAE.

PV 1015 Specific Volume Resistance Test
Determination of Micro-crack Pattern on PV 1058 Chrome Plated Surfaces
PV 1061 Piston rod; Evaluation of Hard Chrome Plating
Determination of PV 1063 Micropore Density
Determination of Potential Differences and Layer Thickness of PV 1065 Nickel Coatings
PV 1073 Corrosion Resistance of Chrome Surfaces
Withstand PV 1200 Environmental Cycle Test (+80/-40) °C
PV 1208 Corrosion Test (SWAAT)
PV 1209 Corrosion Test (Environmental Corrosion Cycle Test)
PV 1210 corrosion test
PV 1217 Stone chip resistor
PV 1300 Thermal stability PVC
PV 1303 Xenon Arc Mild Aging of Vehicle Interior Components
PV 1306 Exposure Test to Determine the Adhesion of Polypropylene Parts
Testing PV 1323 Corrosion Protection Behavior
PV 1401 Corrosion Test
Testing the Corrosion Protection Behavior of Engine Oils When PV 1425 Is Ethanol
PV 1492 Acetic Acid and Water Added
PV 1502 Cracking Resistance Test
PV 1503 Pressure Washing Test
PV 20.01 Determination of wetting ability
Resistance Test to PV 2005 Environmental Cycle Test
PV 2034 Floating Cylinder Peel Test
PV 2037 Resistance to Preservatives and Cleaning agents
PV 2052 Sealing of Edge-Flange Ties
Determination of PV 3015 Condensable Components (G)
PV 3.10.3 Test for resistance to caustic solutions
PV 3.10.5 Resistance Test to Industrial Grade Dust Removers
PV 3.10.7 Testing for Substances Impairing Paint Wetting Ability
PV 3.14.4 Mobile Testing of Stone Chip Resistance of Body Topcoats
Sawdust Resistance Test according to PV 3.14.7 DIN EN ISO 20567-1
PV 3.15.3 Paints and Varnishes; Testing of Corrosion Resistance of Cathodic Electro Coatings on Zinc Plated Steel Plates
PV 3.16.4 Acid Resistance Test
PV 3.1.7 Recording the IR Spectrum of Electro-Dip Paints
PV 3.17.1 Determination of Corrosion Resistance After Mechanical Damage
Remaining Relaxation Torque Measurement in PV 3226 Rotating Test Bearing
PV 3227 Pretension force and torque measurement
PV 3228 Brake pipe screw connection
PV 3305 Ozone resistance
PV 3307 Plastic/elastic deformability
PV 3.3.3. Scratch Resistance Test of Transparent Coatings
PV 3336 Pollution Control
PV 3339 Collects coolant hoses
PV 3341 Determination of the emission of organic compounds
PV 3353 Contamination and cleanability behavior
PV 3355 Contact heat aging
PV 3356 Contamination and cleanability behavior
PV 3410 PUR-Flexible Foam - Test Methods
PV 3410 § 4.4.1 climate storage
PV 3516 Leakage Test
PV 3900 Odor Test
PV 3903 Flexural Hardness Measurement
PV 3905 Drop ball test
Testing PV 3906 Wear Behavior
PV 3907 Brush wear
PV 3908 Wear resistant textiles
PV 3909 Nichtmetallische Flächengebilde Messung der statischen und
PV 3914 Abrasion resistance with a heel
PV 3919 Compression load bias damping
PV 3920 Fogging
PV 3922 Oil and water repellent behavior
Measuring PV 3925 Formaldehyde Emissions
PV 3927 Thermogravimetric identity check
PV 3929 Non-metallic materials. Weathering in Dry, Hot Climate. Aging behavior of plastics, elastomers and folding tops
PV 3930 Humid-hot weathering (Florida test)
PV 3932 Flocked Plastic Parts; Wear resistance
PV 3937 Amine emission
PV 3939 Extractable substance
PV 3942 Determination of organic emissions
PV 3944 Amine color fading sun visor
PV 3952 Scratch Resistance Test
PV 3954 Flexural stiffness flooring installation
PV 3959 hydrolysis test
PV 3960 indentation hardness
PV 3962 Scratch resistant metallic seals
PV 3964 Cream Resistance Test
PV 3965 Visual Color Matching according to DIN EN ISO 3668
PV 3966 Voltage Whitening Properties (Ball Drop Test)
PV 3971 Drop ball test
PV 3974 Determination of Mar Resistance of Precision Molded Grainy Surfaces in Vehicle
PV 3975 Scrub Resistance of Glossy Surfaces in Vehicle Interior
PV 3976 Corrosion of copper by elastomers
PV 3983 Resistance to media
PV 3987 Scrub resistance (micro-scratch resistance) of high-gloss surfaces in the vehicle interior
PV 4.6.3 Chemical Resistance of Automotive Finishes, Gradient Oven Method
PV 5106 Prüfung des Verschleißschutzverhaltens
PV 5605 Radial Rolling Test
PV6601 Acceptance Condition, X-Ray Test
PV 6607 Light alloy wheels, with a high-sheen finish
PV 6609 Light alloy wheels, standard surface requirements
027 TL SR-Veredelte Eutektische Alsi-Legierungen; Werkstoffanforderungen
055 TL AlSiMg Alloy, Sr-Refined, Artificially Aged; Material requirements
1010 TL Interior Materials; Combustion Behavior, Material Requirements
1011 TL flammability vertical
1355 TL illegal Baustahl; Werkstoffanforderungen
Powder Coating for Cylinder Block and Crankcase Surface Protection Requirements
161 TL Painting of plastic exterior parts; Requirements and reviews by Porsche AG
$181 Chrome plated alloy wheels; Surface protection requirements
Inorganic Protective Coating Surface Protection Requirements On Aluminum Parts
187 TL Kugelzapfen nitrokarburiert-beschchtet ; Oberflachenschutzanforderungen
191 TL Paint coating on rear muffler ; Paint adhesion test
$196 Duplex Coating Systems for Small Parts and Bulk Parts; Surface Protection Requirements
203 TL Decorative Chrome Plating on Metal Components (Ni-Cr Coatings); Surface Protection Requirements
$207 Requirement reflection layers
211 TL Paint Coatings on Exterior Plastic Parts; Requirements
212 TL Oxide Coatings on Aluminum Parts; Surface Protection Requirements
214 TL Coating with Zinc-Powder Paint; Surface Protection Requirements
215 TL Electroplated Chrome and Nickel/Chrome Plates for Piston Rods; Surface Protection Requirements
216 TL Corrosion Protection in Half Shafts; Surface Protection Requirements
217 TL Zinc Coatings; Surface Protection Requirements
$218 Body Color Multi-coat Metallic Exterior Paint Body Components Requirements
222 TL Corrosion Protection Coatings for Brake Lines Surface Protection Requirements
226 TL Paint Works on Materials Used in Car Interior Upholstery Conditions
227 TL Single Coat Paint of Zinc Coated Metal Surfaces; Surface Protection Requirements
233 TL Non-Electrolytic Top Coat Zinc Flake Coatings; Surface Protection Requirements
238 TL Surface Protection, Steel Disc Wheels; Surface Protection Requirements
Surface Protection for Alloy Wheel Requirements
240 TL Thin Layer Zinc Phosphating ; Surface Protection Requirements
241 TL Sliding linings for locking systems; Surface protection requirements
244 TL Zinc/Nickel Alloy Coatings; Surface Protection Requirements
245 TL Non-Electrolytic Zinc Flake Coatings; Surface Protection Requirements
256 TL Powder Coating on Metal Surfaces; Surface Protection Requirements
260 TL Painting Metal Surfaces; Surface Protection Requirements
261 TL Painting on Coil Springs; Surface Protection Requirements
262 TL Paint Coating of Chassis Parts; Corrosion Protection
$292 Requirements PVC foil
471 TL Seat Belt Systems and Height Adjustment ASSY ; Material and Functional Requirements
$496 Conditions door trim/side trim panel
52007 TL Requirements hot stamping foils
52013 TL Requirements PPE+PS
52018 TL Double-Sided Foam Adhesive Tape; Material Requirements
52035 TL Requirements PP/EPDM/PE
52038 TL Tags; Self-Adhesive, Material Requirements
Requirements PUR steering wheel foam
52062 TL Requirements PA 6.6, glass fiber reinforced
52064 TL Requirements leather
52065 TL Requirements elastomer seals
52068 TL Requirements EPDM coolant hose
52090 TL Requirements PP-EPDM, glass fiber reinforced
52146 TL Central Hydraulic System Fluid; Lubricant Requirements
52162 TL Automatic Transmission Fluid (ATF), which has reached the end of its useful life in the factory; Lubricant Requirements
52217 TL Aging behavior exterior parts
52221 TL Requirements PP
Adhesive Tape for Thermoplastic Elastomers and Elastomer Profile, Double-Sided Adhesive Adhesive or Heat Activable
Requirements molded headlining
52231 TL ABS and PC Polymer Mixtures; Material requirements
52254 TL Requirements for knitted fabrics with foam backing
52277 TL Requirements POM finished parts
52278 TL Requirements rubber floor mat
52283 TL Polypropylene, Elastomer Modified, Talc or Mineral Modified; Material requirements
52288 TL Polyamide, Mineral Reinforced, Finished Parts; Material requirements
52296 TL Requirements instrument cluster
52306 TL Requirements carpet
52311 TL Requirements graft polymers
52320 TL Requirements dampening sheets
52321 TL Requirements wooden parts
52345 TL Requirements body seals EPDM
52350 TL Requirements upper fabric can be converted
52361 TL Aramid coolant hose requirements
52388 TL Requirements PP
52394 TL Requirements melamine resin foam
52419 TL Requirements PP foil protective sill strip
52428 TL Decorative film with protective function - Component requirements
52437 TL Functional Coated Polycarbonate Headlight Outer Glasses; Material Requirements
52439 TL PA pipe requirements
52440 TL PA 6 glass fiber reinforced, prefabricated parts; Material requirements
52442 TL Requirements floor covering
52443 TL Heavy Duty Supported PP-Tufting - Material requirements
52447 TL Flocking of Interior Upholstery Material
Requirements for composite non-woven foam washers
Painting Metallic Decorative Inserts for Outdoor Requirements
52452 TL Polypropylene with increased crystallinity; Material requirements
52464 TL Rim Trim Elements ASSY Requirements
52473 TL Sunshade requirements
52476 TL Requirements POM
$526 Requirements soft PVC
52602 TL Requirements PU foam
52607 TL Requirements PUR spacers
52608 TL Requirements non-woven
52613 TL Requirements PET non-woven absorbent
52622 TL Thermoplastic Elastomers for Outdoor
$52625 Requirements plastic mounting support
52631 TL Test Scope for Material Data Sheets
52637 TL Requirements column cover/entrance sill
52639 TL Requirements PP
52649 TL Requirements wheel guard
52652 TL Requirements ASA-PC
52653 TL Requirements PU flexible foam
52660 TL Requirements within the scope of shield applications
52663 TL Requirements radiator grille
52671 TL PMMA, Glossy Coatings for Outdoor; Material requirements
52673 TL Requirements ASA+PA
52674 TL Hochglanzoptik Prüfumfang für Bauteile in Folienhintersschäumte Außenteile
52680 TL Components Made of Long Fiber Reinforced or Continuous Filament; Reinforced Plastic Composites (FRP); Materials and Component Requirements
52681 TL Requirements fuel filler pipe
52682 TL Requirements for parts in contact with the coolant
52685 TL Requirements Polyether-PUR soft foam
52690 TL Requirements PP outer parts
52693 TL Requirements mat
52694 TL Corrugated pipe requirements
527 TL ABS Graft Polymer, Finished Parts; Material requirements
52703 TL Requirements TPE gaskets
52704 TL EPDM Body Gaskets; Material requirements
52705 TL Soft touch tactile polypropylene for interior
52711 TL Underbody Panels Reinforcing CD
528 TL Chrome Plated Plastic Parts; Material Requirements
529/2 TL Requirements PUR
533 TL Hard PE requirements
533/1 TL Requirements PE container
534 TL Polyamide 6, Fertigteile; Werkstoffanforderungen
554 TL Requirements PET resin, glass fiber reinforced
$591 Organic glass requirements for lights
592 TL Reflective Coatings on Mirror Glass; Material requirements
669 TL Requirements PE finished parts
766 TL Brake fluid ; Material requirements
774 TL Ethylene Glycol Based Cooling Additive; Material requirements
778 TL Low Temperature Lubricating Grease; Lubricant requirements
80260 TL Fuel filter Functional Requirements
80286 TL Cooler Heat Exchanger ; functional requirements
82060 TL Fuel filter; functional requirements
82086 TL Refrigerant heat exchanger; functional requirements
82132 TL Charge Air Coolers; functional requirements
82316 TL R134a/R1234yf Refrigerant Lines; functional requirements
82406 TL Heater Cores; functional requirements
82436 TL Front wing hinge; Single and multi-joint
82448 TL Flare Load Capacity, Reverse Bending Test
TL 825 12 / AK-LV 02 Airbag System - Airbag Cushions (Installation Location: Steering Wheel, Dashboard). Requirements and Test Conditions
82526 TL Fahrgelenke ; Anforderungen and Prüfbedingungen
874 TL radiator; functional requirements
934 TL Wiper Systems; Functional and Material Requirements
956 TL Exterior Lamps for Europe/USA/Japan; functional requirements
976 TL Windshield washer system requirements
VW 01137 Cleaning Requirements for Coolant-Carrying Components
13750 Surface Protection for Metal Parts ; Surface Protection Types, Codes
VW 2.8.1 Elastomers - Material Requirements and Tests
VW 2.8.1 § 3.13 Lubrication
VW 2.8.1 § 3.9 Ozone Resistance
VW 44045 Polypropylene, Finished Parts - Material Requirements
VW 50002 Whole Vehicle ; Test Environment; Material Compatibility
VW50014 General Conditions for Components and Semi-finished Products; Requirements and Tests
VW50099 Casting and Casting Technology Definitions
VW50105 Trim Cover Materials - Requirements, Quality Specifications, Tests
VW 50105 § 10.7 Permanent set
VW50106 Requirement threads and embroidery threads
VW50121 Acceptance Conditions for Surface Appearance
VW50123 Thermoplastic Elastomers - Quality Requirements
VW50125 Polyamide 6 for Vehicle Interior Coated Parts - Material Requirements
VW50127 Polyamide 66, Finished Parts in Passenger Compartment - Material requirements
VW50129 Bonded Coat-Closed Body GasketsRequirements and Tests
VW 50129 § 3.13 Window glass edge wear
VW 50129 § 3.15 Abrasion with a wear cloth
VW50131 Soundproofing Elements, Self-Adhesive - Adhesive Properties
VW50133 PA66 for Interior Exterior Finished Parts - Material Requirements
VW 50133 § 4.1 Workmanship (Endurance to test environment)
VW50134 PA6 for Interior Exterior Finished Parts - Material Requirements
VW50136 PBT for finished parts outside the vehicle interior
VW50179 Emissionsverhalten bei Bauteilen im Fahrzeuginnenraum
VW50180 Components in Passenger Compartment Emissions Behavior - Use of low-emission materials and components in the passenger compartment and trunk, as well as parts in contact with air flowing into the passenger compartment
VW50181 Fogging behavior
VW50185 Vehicle Parts - (Outdoor Resistance) - Short-term test methods / Laboratory tests only
VW50190 Interior trim components - Metrological assessment of color and gloss level - Visual assessment of chrome surfaces
VW50194 Determination and evaluation of the tolerance of luminous grain differences of effect paints
Colorimetric Evaluation of VW 50195 Automobile Paint Coatings
VW 50195 § 3.2.1 Solid paint color measurement (CIELAB)
VW 50195 § 3.2.1 Unity Color measurement (CIELAB)
VW50554 Standard Atmospheres for Conditioning
75141 Test Specification
VW78001 Kühlmittelsystem
VW80000 Electrical and electronic components in motor vehicles up to 3,5 tons General requirements, test conditions and tests
VW80101 Requirements car electronics
VW 80200-2 Attachment Parts - Body Mounted Parts
VW 80972 General Requirements and Measurement Conditions
VW 80972 § 5.6 Resistance to chemicals
VW91101 Avoidance of Hazardous Substances
VW 96023-2 Whole Vehicle; Porsche AG Corrosion Protection Requirements; Part 2: After Altered Environmental Cycle Test in accordance with VW 96380
VW 96076 Allgemeine Konstruktionshinweise, Korrosionsklassen and Zoneneinteilung
VW96135 Indoor / Outdoor - Surface decorations; Plastic components with electro-deposited metal surfaces; Requirements and Tests
VW 96142 Acrylic foam tape, self-adhesive on both sides
VW96168 Varnishes and varnishes; Requirements and exams
VW 96183 Interior ; Surface Decorative Materials - Coating, Pad Printing and Hot Stamping; Requirements and Tests
VW 96207 Painting / powder coating of metallic vehicle parts; Requirements and exams
VW 96208 Powder coating - surface x 652; Requirements and TESTS
VW 96210 Anodic Oxidation - Anodized Layers (w625, w630, w640); Requirements and inspections
VW 96232 / PTL 8125 Car Interior, Tufted Carpet for Flooring, Textile Covers and Mats, Requirements and Tests
VW 96288 dammmaterial
VW 96292 Schläuche für Scheibenwaschanlagen ; Anforderungen and Prüfungen
VW96368 Fahrwerk; Fahrwerksgelenke; Anforderungen and Prüfungen
VW 96378 PPV 4014 - Exterior; Decomposition of Non-Metallic Materials; Testing in Dry-Hot and Humid-Hot Climates
VW 96379 Exterior; Testing of Attachments; Climate Test
VW 96380 Corrosion Test – Modified Environmental Cycle Test
VW 96380 variant 1 corrosion test
VW 96380 Variant 1 Korrosionsprüfung
VW 96386 Color Control
VW 96390 Determination of volatile organic emissions
VW 96408 Peel Test
VW 96424 interior; Emissionsverhalten - Thermodesorption analysis in Anlehnung and VDA 278
VW 96430 Unterbodenschutzverkleidungen - Sandwichbauweise (Anforderungen and Prüfungen)
VW 96446 Prüfverfahren zur Eigenschaftsbestimmung
VW/Audi LAH 000 853 Spoiler in the underfloor area
VW EP 81 020.16 Schraubenfestsitz
VW EP 81020.16 Retaining screw
VW PV 1004 Natural stress state
VW PV 1015 § 3 specific volume resistance
VW PV 1021 Determination of iron content
VW PV 1058 Identifying the chrome crack grille
Determination of VW PV 1063 Micropore Density
VW PV 1065 Potential differences and layer thicknesses of nickel coatings
VW PV 1200 Resistance to environmental loop test
VW PV 1209 Environmental corrosion cycle test
VW PV 1210 corrosion test
VW PV 1210, modified Corrosion climate cycle test
VW PV 1210, modifier Corrosions-Klimawechselprüfung
VW PV 1217 Resistance to stone chipping
VW PV 1300 Thermal stability test
VW PV 1303 Light exposure test (100°C)
VW PV 1306 Exposure test to determine stickiness
VW PV 1323 solar test
VW PV 1502 Weathering (resistance to cracking)
VW PV 1503 Steam boost test
VW PV 2005-A Climate cycle resistance; Variant A: single pieces
VW PV 2027 tensile load
VW PV 2034 Floating cylinder peel test (adhesion test)
VW PV 2037 Resistance to preservatives and cleaning agents
Determining the fogging characteristics of the VW PV3015 (Fogging G)
VW PV 3.10.7 Test for substances that impair paint wetting
Resistance to VW PV 3.11.1 Premium petrol
Resistance to VW PV 3.11.2 FAM test fuel
VW PV 3.11.3 Resistance to diesel fuel
VW PV 3.12.1 Oil resistance
VW PV 3.14.4 Stone Impact Resistance (mobile Prüfung)
VW PV 3.14.7 Stone impact test
VW PV 3.17.1 Stone impact resistance
VW PV 3.2.4 Gloss measurement
VW PV 3305 § 3.1 Ozone resistance
VW PV 3307 Determination of plastic and elastic deformation
VW PV 3314 § 3.5 Tear strength between edge guard and hose or lip
VW PV 3.3.3 scratch resistance
VW PV 3330 Determination of compression set (Permanent deformation)
VW PV 3340 § 4 Tensile strength of adhesive seam
VW PV 3341 Non-metallic materials for vehicle interiors
VW PV 3341-MS/FID Determination of emission of organic compounds (TVOC with HS-GC-FID/MSD)
VW PV 3353 Contamination and cleanability behavior
VW PV 3354 Adhesion of the finish
VW PV 3355 Migration painting
VW PV 3356 Contamination and cleanability behavior
VW PV 3357 Surface and edge flame exposure
VW PV 3360 Determination of Relief behavior (Random Drum Pilling Tester)
VW PV 3361 Velcro closure test
VW PV 3362 Separation Resistance
VW PV 3363 Permanent deformation test
VW PV 3366 Wear characteristics of flocked material (VW chisel test)
VW PV 3427 flexibility test
VW PV3549 Environmental Vibration Resistance Test
VW PV3900 Bauteile des Fahrzeuginnenraumes; Geruchsprüfung
VW PV3903 Bending strength
VW PV3904 Flame Retardant (Aging retention)
VW PV3905 Ball drop test
VW PV3906 Wear behavior
VW PV3907 Brush wear test
VW PV3908 Rotary wear test (Schopper)
VW PV3909 Static and permanent elongation
VW PV3919 Compression stress determination
VW PV3922 Oil and water repellent behavior
Measurement of VW PV3925 Formaldehyde emissions
VW PV3927 Thermogravimetric analysis (TGA)
VW PV3928 External pilling (Martindale procedure)
VW PV3929 Weatherproof (dry-hot climate, eg Kalahari, Arizona, South America)
VW PV3930 Non-Metallic materials - Weathering in humid, hot climate
VW PV3931 Hardness test (Shore L)
Wear resistance of VW PV3932 Flocks (VW chisel test)
VW PV3935 Pyrolysis-GC-MS
VW PV3936 Polymer Materials - Testing Resistance to Components of Blowing Gases
VW PV3937 Amine emission (indicator method)
VW PV 3939 § 3.1 Identification of extractable components
VW PV 3939 § 3.1.1 Identification of extractable components
VW PV 3939 § 3.2 Visual assessment of removable components
VW PV3942 Determination of organic emissions
VW PV3944 Amine discoloration
VW PV3945 Dynamic-Mechanical Analysis
VW PV3946 sewing power
VW PV3949 Knot test (with wear chisel)
VW PV3951 Magnetic Adhesion
VW PV3952 Scratch resistance
VW PV3955 Determination of seam slip resistance
VW PV3958 Determination of water tightness
VW PV3959 Interior Hydrolysis Test on Molded Ceilings with Laminated Decorative Material
VW PV3961 Hook and Loop test
VW PV3964 Passenger Compartment Surfaces - Cream Strength Test
VW PV3965 Visual Color Matching
VW PV3966 White cracking characteristics (Ball drop test)
VW PV3968 Contamination behavior (Martindale method)
VW PV3969 adhesion strength
VW PV3970 Determination of mold growth potential
VW PV3971 Low Temperature Adhesion
VW PV3973 Pull test
VW PV3974 Determination of scratch slope
VW PV3975 Scrub Resistance of Glossy Surfaces
VW PV 3975 Draft Wear resistance on high-gloss surfaces
VW PV3976 Corrosion effect on copper
VW PV3983 Stress crack resistance
VW PV3987 Scrub resistance of high-gloss surfaces (micro-scratch resistance)
VW PV 5015 BR Hydrolysis resistance
Foam Used for VW QP M050 Gap Sealing, Quality Requirements
VW QP R 015 Quality Requirements - Self-Adhesive Film
VW TL1010 Interior Materials - Combustion Behavior, Material Requirements
VW TL203 Galvanische Ni-Cr-Überzüge - Oberflächenschutzanforderungen
VW TL 203 § 3.4c file test
VW TL 203 § 3.4d Resistance to temperature cycling
VW TL211 Paint Coatings on Exterior Plastic Parts
VWTL 212 Oxide Coatings on Aluminum Parts - Surface Protection Requirements
VW TL217 Zinc coatings for batch galvanized components - Surafce protection requirements
VW TL 218 Body Color Metallic Multicoat Paint on Exterior Components
VW TL 226 Paints on Materials Used in Interior Upholstery - Requirements
VW TL 226 § 3.12.3.2 / PV 3906 Wear behavior, 100 crockmeter strokes against dry fabric
VW TL 226 § 3.12.3.3 / PV 3906 Wear behavior, 100 crockmeter strokes against damp fabric (water)
VW TL 226 § 3.12.3.4 / PV 3906 Wear behavior, 2000 crockmeter strokes against dry fabric
VW TL 226 § 3.13.2 Drop test
Wear behavior of VW TL 226 § 3.13.3 / PV 3906
VW TL 226 § 3.7.2 Cross-cut test with adhesive tape pull (St. Andrew's cross)
VW TL 227 Single Coat of Zinc Coated Metal Surfaces - Surface Protection Requirements
VW TL 233 Non-Electrolytic Applied Organic Topcoat Zinc Flake Coatings - Surface Protection Requirements
VW TL 244 Zinc/nickel alloy coatings - Surface protection requirements
VW TL 256 Powder Coating on Metal Surfaces - Surface Protection Requirements
VW 260 TL Painting Metal Surfaces, Surface Protection Requirements
$292 PVC films - Material requirements
VW TL428 Polyester Belt Webbing - Material Requirements
VW TL481 PVC-Foam Film
VW TL496 Door/Rear Side Trim Panel ASSY - Material Requirements
VW TL 496 § 3.14 Resistance to cleaning agents (Staining)
VW TL 496 § 4.2.5 Behavior towards detergents
VW TL 496 § 5.5 droplet test
VW TL52018 Double Sided Foam Adhesive Tape
VW TL52035 PP/EPDM/PE-Polymer Blend, Finished Parts - Material Requirements
VW TL 52035 § 5.14 Resistance to test environment
VW TL52038 Stickers - Self-Adhesive, Material Requirements
VW TL 52045 PUR-Integral Foam for Steering Wheel Cover - Material Requirements
VW TL 52045 § 4.4 Tropfentest
VW TL 52045-4.4 Drop test
VW TL 52057 § 4.5.3 release force
VW TL52062 PA 6.6, Glass Fiber Reinforced, for Finished Parts - Material Requirements
VW TL52064 Leather, Material requirements, 6 types: A, C, G, D, E, F
VW TL 52065 Elastomer Seal Made of Cellular Rubber - Material Requirements
VW TL 52065 § 5.8 Paint apathy, contact/environment discoloration
VW TL 52069 Lightweight Needle Punched Nonwoven, Material Requirements
VW TL 52094 Trim Panel Load Compartment - Material Requirements
VW TL 52203 Polypropylene, wood-flour filled - Material requirements
VW TL 52217 Outdoor plastic and elastomer components - aging behavior due to artificial weathering
VW TL 52226 Molded Headliner ASSY, Lightweight Types - Material Requirements
VW TL 52231 ABS and PC Polymer Blends - Material Requirements
VW TL 52254 Knitted foam, laminated - Material requirements
Shockproof Modified Finished Parts Made Of VW TL 52277 POM, Material Requirements
VW TL 52283 polypropylene, elastomer modified, talc or mineral reinforced exterior components
VW TL 52283 § 4.7 Resistance to agents
VW TL 52288 Polyamide, Mineral Reinforced, Finished Parts, Material Requirements
VW TL 52296 Dashboard and Other Foam Backed Components - Material Requirements
VW TL 52296 § 2.1.4 Resistance to agents (drop test)
VW TL 52306 Carpet - Material Requirements
VW TL 52310 Microfiber Seat Cover Material and Decorative Material
VW TL 52311 ASA-Graft Polymer, Finished Parts - Material Requirements
VW TL 52321 Wooden Parts for Interior Trim - Material Requirements
VW TL 52323 Nonwoven Fabric Damping, Molded - Material Requirements
VW TL 52345 § 4.9.1 Window glass edge wear
Best material for VW TL 52350 Convertible - Material requirements
VW TL 52382 PC/PBT - Mixture, painted parts, material requirements
VW TL 52388 Polypropylene for Vehicle Interior Use - Material Requirements
VW TL 52394 Melamine Resin Foam Sound Insulation - Material Requirements
VW TL52411 Nonwoven Fabric, Thermoplastic Bonded - Material Requirements
VW TL 52422 Trim Elements Made of Trilaminate, Material Requirements
VW TL 52423 Driver Airbag Cover
VW TL 52426 PC+ASA-Polymergemisch, Fertigteile - Werkstoffanforderungen
VW TL 52428 Protective decorative film - Component requirements
VW TL 52435 § 6.7 Resistance to penetration
VW TL 52437 Functional Coated Polycarbonate Headlight Outer Lenses - Material Requirements
VW TL 52439 Polyamide pipe, Material requirements
VW TL 52440 PA6, fiberglass reinforced, finished part, material requirements
VW TL 52442 Dilours Flooring - Material requirements
VW TL52447 Flocking Interior Upholstery Material - Material Requirements
VW TL 52448 Natural Fiber Molding Material, Thermoplastic Bonded
VW TL 52451 Painting Metallic Decorative Fittings for Exterior
VW TL 52452 Polypropylene with Increased Crystallization - Material Requirements
VW TL 52463 Polypropylene Multiwall Sheet
VW TL 52468 Binding, Nubuck Look - Material Requirements
VW TL 52472 Polyolefins for floor coverings
VW TL 52472 § 3.5.14 Color fastness to abrasion (rotary abrasion test)
VW TL 52475 ABS + PA6-Polymer mix - Material requirements
VW TL 52476 POM, finished parts - Material requirements
VW TL 52478 Foam Coated fabrics, laminated - Material requirements
VW TL 52480 Plastic Fuel Tank, 6 Layer Coextrusion - Material Requirements
VW TL 52482 Textile floor mats: Material requirements
VW TL 52499 Molded Trim Panels Made of Thermoplastically Bonded Mixed Fiber Material, Material requirements
VW TL 52499 § 5.5.1 Color fastness to abrasion (rotary abrasion test)
VW TL 52602 Polyurethane Foamed Plastic for Interior Upholstery - Material Requirements
VW TL 52606 Leather "perforated" for defined breathability
VW TL 52608 Fine Fiber Nonwoven Fabric, Multilayer - Material Requirements
VW TL52611 Carpet Mats - Material Requirements
VW TL 52622 Thermoplastic Elastomers with Thermoplastic for Outdoor
VW TL 52623 PUR Flooring - Material Requirements
Test Scope for VW TL 52625 Plastic Front End Carrier, Material Data Sheets
VW TL 52628 Acoustic Trim panels in Passenger Compartment as PES-Nonwoven / EPDM / PUR Sandwich Composite
VW TL 52629 Dekorware für Koffer - und Laderaum
VW TL 52631 Bumper Covers, Spoilers
VW TL 52634 Charge air hoses made of high temperature ACM elastomer
VW TL 52636 POM,Finished Parts (Not For Passenger Compartment) Material Requirements
VW TL 52637 Mast Trim Panel ASSY and Protection Plate
VW TL 52639 for instrument cluster polypropylene, reinforced, impact - Material requirements
VW TL 52641 EPDM Body Gaskets - Quality Requirements
VW TL 52649 Wheel Guard Liner, Wheel Guard - Test Scope for Material Data Sheets
VW TL 52652 ASA and Polymer Blends, Material Requirements
PUR-Flexible Foam for VW TL 52653 Car Seats - Material Requirements
VW TL 52654 PVC synthetic leather, fabric reinforced
VW TL 52659 PVC artificial leather and PVC foam sheets in solid composite with vehicle interior components
VW TL 52660 underbody applications, engine capsule, stone guard, CW Covers
VW TL 52662 Molded Parts from Needle Punched Nonwoven Fabric
VW TL 52663 Bumper Integration Radiator Grille for Increasing Material Requirements - Test Scope for Material Data Sheets
VW TL 52671 PMMA, Glossy Finishes for Exterior
VW TL 52673 ASA + PA-polymer mix
VW TL 52675 Artificial leather - Material requirements
VW TL 52680 Components Made of Long Fiber Reinforced or Continuous Filament Reinforced Plastic Composites (FRP) - Materials and Component Requirements
VW TL 52682 PA66, Glass fiber reinforced, for finished parts carrying coolant - Material requirements
VW TL 52685 Polyether PUR Lightweight Foam for Engine Compartment Absorbers - Material Requirements
Polypropylene for VW TL 52688 Battery Cases - Material Requirements
VW TL 52693 TPE Mat Material Requirements
VW TL 52694 Corrugated Pipe - Material Requirements
Velvet Velvet for VW TL 52696 Flooring - Material Requirements
VW TL527 ABS Graft Polymer, Finished Parts - Material Requirements
VW TL 52704 EPDM Body Gaskets - Material Requirements
VW TL 52705 Soft Touch Tactile polypropylene for vehicle interiors - material requirements
VW TL 52711 Underbody Protection - LWRT / cd Enhanced Underbody Panels
VW TL 52722 Polyether PUR Foam in Engine Compartment - Material Requirements
VW TL 528 Chrome Plated Plastic Parts - Material Requirements
VW TL 533 High Density Polyethylene - Material Requirements
VW TL534 Polyamide 6, Finished Part - Material Requirements
VW TL 561 Self-Adhesive PUR Foamed Plastic Gaskets, Material Requirements
Organic Glass for VW TL 591 Lamps - Material Requirements
VW TL 598 Decorative film - Component requirements
VW TL669 High Molecular Weight Polyethylene, Finished Parts - Material Requirements
VW TL 7031125 TL Pressoff 7
VW TL 82345 ASSY shift mechanism, automatic transmission
VW TL/ Features 7031125 Features Compression Molded Material 7