Environmental Tests of ISO 9022 Optical and Photonic Devices

The ISO 9022 series of standards specifies the methods by which optical and photonic devices are tested for and require compliance with environmental exposures, defines terms related to environmental testing of optical and photonic devices, including additional assemblies (e.g. mechanical, chemical and electronic devices), and covers the basic characteristics of testing. With its experienced staff and technological infrastructure, EUROLAB Laboratory performs all environmental test simulations for you and presents an accredited and recognized report.

The standard series we tested in the EUROLAB laboratory is as follows.

ISO 9022-1
Optics and optical equipment - Environmental test methods part 1: Definitions, scope of test.
This part of ISO 9022 defines terms related to optical equipment and environmental testing of optical components and equipment containing optical systems, and specifies the test conditions.

ISO 9022-2
Optics and optical equipment - Environmental test methods part 2: Cold, heat, humidity.
This standard specifies the specific methods for testing the resistance of optical instruments and instruments containing optical components, under equivalent conditions, to heat and humidity in the air. The purpose of the experiment is to investigate the extent to which, for example, optical, thermal, mechanical, chemical and electrical performance characteristics are affected by heat and/or humidity.

ISO 9022-3
Optics and optical equipment - Environmental test methods part 3: Mechanical stress.
The purpose of the experiment is to investigate to what extent the optical, thermal, mechanical, chemical and electrical performance properties of the sample are affected by mechanical stress.

ISO 9022-4
Optics and optical equipment - Environmental test methods - Part 4: Salt fog.
This standard specifies methods for measuring the ability of optical instruments and instruments containing optical components to resist salt vapor under equivalent conditions. The purpose of the experiment is to evaluate the ability of the device to resist the effects of the salt atmosphere as quickly as possible.

ISO 9022-5
Optics and optical equipment - Environmental test methods part 5: Cold and low air pressure.
This part of ISO 9022 covers the effects of cold and low air pressure on equipment under test and the test's ability to resist these effects.

ISO 9022-6
Optics and photonics - Environmental test methods - Part 6: Dust test.
This part of ISO 9022 specifies methods for environmental testing of optical instruments for their ability to withstand the impact of blowing dust under equivalent conditions, including additional equipment from other fields (e.g. mechanical, chemical and electronic equipment).

ISO 9022-7
Optics and photonics - Environmental test methods - Part 7: Resistance to dripping or rain.
This part of ISO 9022 specifies methods for environmental testing of optical instruments, including attachments from other fields (e.g. mechanical, chemical and electronic devices) for their ability to withstand the impact of dripping or rain, under equivalent conditions.

ISO 9022-8
Optics and photonics - Environmental test methods - Part 8: High internal pressure, low internal pressure, subduction.
This part of ISO 9022 specifies methods for environmental testing of optical instruments for their ability to withstand the impact of high pressure, low pressure, including attachments from other fields (e.g. mechanical, chemical and electronic devices) under equivalent conditions. or immersion.

ISO 9022-9
Optics and optical equipment - Environmental test methods - Part 9: Solar (Solar) radiation.
This part of ISO 9022 specifies methods for environmental testing of optical instruments, including attachments from other fields (e.g. mechanical, chemical and electronic equipment) under equivalent conditions, for their ability to withstand the effects of simulated solar radiation or laboratory wear. simulated solar radiation is a combination of heat and humidity.

ISO 9022-10
Optics and optical equipment - Environmental test methods part 10: Combined sinusoidal vibration, dry heat or cold.
This part of ISO 9022, cold, dry heat or temperature variation of optical instruments, including additional devices, from other fields (e.g. mechanical, chemical and electronic devices) under equivalent conditions.

ISO 9022-11
Optics and optical equipment - Environmental test methods part 11: Mold growth.
This International Standard specifies methods for measuring the ability of materials to resist mold growth under equivalent conditions for optical instruments and instruments containing optical components and optical instruments.

ISO 9022-12
Optics and optical instruments - Environmental test methods - Part 12: Contamination.
This European Standard specifies methods for measuring the state of contamination resistance of optical instruments and instruments containing optical components, under equal conditions, in contact with corrosive chemicals (later referred to as test substances in this standard).

ISO 9022-13
Optics and optical instruments - Environmental test methods - Part 13: Shock, impact or free fall combined with cold or dry heat.
This International Standard specifies methods for measuring the ability of optical instruments and instruments containing optical components to resist shock impact or free fall combined under equivalent conditions at cold or dry temperature.

ISO 9022-14
Optics and optical instruments - Environmental test methods - Part 14: Dew, frost, ice.
This standard specifies methods for measuring the ability of optical instruments and optical components to resist dew, frost and ice under equivalent conditions.

ISO 9022-15
Optics and optical instruments - Environmental test methods - Part 15: Broadband numerically controlled random vibration combined with cold or dry heat.
This International Standard specifies methods for testing the strength of optical instruments and instruments containing optical components to resist numerically controlled coupled broadband vibration under equivalent conditions at dry temperature or cold.

ISO 9022-16
Optics and optical instruments - Environmental test methods - Part 16: Impact or steady state acceleration combined with dry heat or cold.
This International Standard specifies methods for measuring the resistance properties of optical instruments and instruments containing optical components to impact or steady acceleration combined with dry heat or cold under equivalent conditions. The purpose of the experiment; To determine the extent to which the optical, thermal, mechanical, chemical and electrical performance characteristics of the sample are affected by impact or steady acceleration combined with dry heat or cold.

ISO 9022-17
Optics and optical instruments - Environmental test methods - Part 17: Exposure to sunlight.
This standard covers optical instruments and instruments containing optical components, under equivalent conditions; It covers methods for testing its power to resist smudging combined with solar radiation.

ISO 9022-18
Optics and optical instruments - Environmental test methods - Part 18: Exposure to low internal pressure with vaporous heat.
This International Standard specifies methods for testing the ability of optical instruments and instruments with optical components to resist low internal pressure combined with vapor heat under equivalent conditions.

ISO 9022-19
Optics and optical instruments - Environmental test methods - Part 19: Temperature cycles combined with sinusoidal or random vibration.
This European Standard specifies test methods for evaluating the resistance of optical and optical instruments to temperature cycles combined with sinusoidal or random vibration under equivalent conditions.

ISO 9022-20
Optical and photonics - Environmental test methods - Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide.
This part of ISO 9022 specifies methods for environmental testing of optical instruments for their ability to withstand the action of sulfur dioxide (SO2), including attachments from other fields (e.g. mechanical, chemical and electronic devices) under equivalent conditions. or hydrogen sulfide (H2S) in a humid atmosphere.

ISO 9022-21
Optics and optical instruments - Environmental test methods - Part 21: Low pressure with ambient temperature or dry heat
This standard specifies methods for testing the ability of optical instruments and instruments containing optical components to resist low pressure with ambient temperature or dry heat under equivalent conditions.

ISO 9022-22
Optics and photonics - Environmental test methods - Part 22: Impact or random vibration combined with cold, dry heat or temperature change.
This part of ISO 9022, cold, dry heat or temperature variation of optical instruments, including additional devices, from other fields (e.g. mechanical, chemical and electronic devices) under equivalent conditions.

ISO 9022-23
Optical and photonics - Environmental test methods - Part 23: Cold, ambient temperature, dry and moist heat combined with low pressure.
This part of ISO 9022 specifies methods for environmental testing of optical instruments, including additional assemblies from other areas under equivalent conditions, for their ability to resist the action of low air pressure combined with cold, including potential condensation and freezing of water, ambient temperature and dry or moist heat.

EUROLAB Laboratory provides you with fast and accurate results in the tests of all optical and photonic devices.