IEC EN 60603-8 Connectors for frequencies below 3 MHz for use with printed boards - Part 8: Male Contact - Split Connectors for Printed Boards

EUROLAB, with its state-of-the-art accredited laboratories and expert team, provides precise and fast testing services within the scope of IEC EN 60603-8 testing. Applies to a set of corresponding two-piece connectors for printed boards for board-to-board and board-to-cable connection, with tin or gold-plated contact area, depending on the style. Free-standing or fixed board-mount connectors are provided with terminations suitable for printed boards conforming to the IEC EN 60097 series using a 2,54 mm (0,1 inch) grid as specified in IEC EN 60326.

The design of the free and fixed connectors is such that a minimum displacement of 0,32 mm (0,0126 in) can be achieved provided the free connector or fixed connector is floating-mounted. The design of the free and fixed connectors is such that an initial offset of ±3° in the longitudinal axis and ±3° in the transverse axis is allowed.

Dimensions in millimeters are original. The drawings are shown in the first angle projection. Shapes of connectors may differ from those given as long as specified dimensions are not affected.

Permissible operating voltages depend on the application and applicable or specified safety requirements. For this reason, gap and leakage distances are given as operating characteristics. In practice, reductions in leakage or clearance distances may occur due to the conductive nature of the printed circuit board or the wiring used and must be duly taken into account.

EUROLAB assists manufacturers with IEC EN 60603-8 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.