IEEE-802.15.4 Test

Wireless Device Testing

IEEE-802.15.4 Test

Does your company work with IEEE-802.15.4 protocol technologies (eg ZigBee, ISA 100 Wireless, etc.)? Then EUROLAB can assist you in testing your wireless radio (PHY / MAC layers). IEEE-802.215.4 is a standard developed to provide reliable, low cost, low power, wireless networking products.

IEEE-802.15.4 Test

The easiest ZigBee is recognized as physical (PHY) and media access control (MAC) layers for ISA 100 Wireless, WirelessHART, Thread, 6LowPAN and MiWi features.

Since all ZigBee products must be based on compatible IEEE-802.15.4 devices, EUROLAB has the authority to authorize 802.15.4 components for use with compatible platforms by the ZigBee Alliance.

In addition, EUROLAB has experience in testing 802.15.4 products for other protocols, including ISA, and at both 2.4GHz and Sub-GHz frequencies (for example, 868MHz for Europe and 900MHz for North America). The test team at EUROLAB has developed a Tx / Rx analyzer that allows the execution of ZigBee-based 802.15.4 proficiency tests, which can be written to test with other protocols, including Thread. All radios that successfully pass the IEEE-802.15.4 test in EUROLAB are recognized by ZigBee Alliance as qualified for use on ZigBee platforms and end devices. The test can also be performed in the IEEE-802.15.4g standard for smart grid networks.

EUROLAB uses in-depth analysis of IEEE-802.15.4 transmission during the quality of the devices for certification competence. Our PHY layer analysis includes Error Vector Size (EVM), symbol rate, carrier accuracy, etc. Includes essential tests such as. Direct Protocol Application Compliance Statements (PICS) for the 802.15.4 protocol can systematically determine the compliance of your NTS product with the protocol standard. A similar development approach has been adopted for the creation of MAC tests. Using the Message Sequence Graphics (MSC) produced by the SDL model, EUROLAB engineers have developed a comprehensive MAC package that verifies the MAC layer's framing, timing, ranking and all other aspects. The result of these efforts is a complete turnkey qualification solution for 802.15.4 manufacturers who require qualification for their devices to comply with the IEEE standard.

In addition, EUROLAB ZigBee performs MAC, PHY, ZCP and profile / application tests and, when successfully completed, provides ZigBee Alliance Qualification Statements (for IEEE-802.15.4) and Compatibility (for ZigBee stack). Certification after inspection of test results. We can also verify your products and provide complete, verified results to send for certification / verification for other protocols including Thread and 6LowPAN. EUROLAB can also help you verify the coexistence, interference and performance of your wireless product.

Get Offer Now

To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.

Whatsapp