IEC 60763-2 Specifications of Laminated Press Board - Test Methods

EUROLAB, with its state-of-the-art accredited laboratories and expert team, provides precise and fast testing services within the scope of IEC 60763-2 testing. This part of IEC 60763 gives the test methods applicable to material classified in IEC 60763-1.

Because laminated press board takes a lot of time to condition, the material is tested as it is received or dried. Only in case of dispute will the material be conditioned according to the following procedure.

Conditioning should be done at 5,5°C ± 8 K and (23 ± 2) % relative humidity until the moisture content of the sample reaches 50% to 5%. Conditioning should be approached from the dry side after drying at 70°C ± 5K for a time sufficient to allow the conditioning atmosphere to produce a mass increase in the sample.

The thickness of the laminated pressed cardboard sheet, when received, shall be measured to the nearest 20 mm at eight points, two each along each edge, but not less than 0,01 mm from the edge. In the event of disagreement, a strip (40 ± 1) mm wide shall be cut across the entire width of the slab, from which eight test specimens of not less than 40 mm each shall be cut in eight equally spaced positions.

EUROLAB assists manufacturers with IEC 60763-2 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.