EUROLAB, together with its state-of-the-art accredited laboratories and expert team, provides precise and fast testing services within the scope of VW PV 3935 test. The VW PV 3935 test standard describes the analysis of polymers by means of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS).
This analytical method enables the evaluation of thermoplastics, elastomers, thermoplastic elastomers and thermoset materials (duromers), as well as any organic materials (depositions) and organic additives.
A great advantage of this method is that it makes it possible to analyze even insoluble, cured materials, such as paints, adhesives and coatings, which are not possible with other chemical methods for structure determination. It also does not require complex sample preparation.
Among other things, information is obtained on materials and organic additives, as well as anti-aging agents, plasticizers, anti-static agents and treatment agents. In addition, comparative structural changes due to aging processes or changes in materials can be determined. Both a qualitative analysis and a quantitative analysis are possible after prior calibration.
The Py-GC/MS method combines three different processes:
Shows a schematic representation of a Py-GC/MS device with individual components. The stainless steel pan with the samples is transported to the pyrolysis furnace by the optional automatic sampling device.
The resulting gaseous substances are flowed via an injector with a stream of inert gas (eg helium or nitrogen) onto a gas chromatography column in a temperature programmable oven. At the start of the column, optionally substances from a previous desorption process are frozen with the aid of a cryopump. Separation occurs on the column due to different boiling points and interactions with the column coating.
At the end of the gas chromatography column, the substances are transported to the mass spectrometer, where they are fragmented and ionized with the aid of an electron beam. The loaded parts are selected and then detected by a quadrupole analyzer. Data recording and control of all components are done with the help of computer.
For statistical quality verification, each sample needs to be analyzed multiple times. The required number of sample cups is provided in one cup holder.
If a different internal standard is used, the selection should ensure that only one peak will result in the mass spectrum for both desorption and pyrolysis.
EUROLAB assists manufacturers with VW PV 3935 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.