EUROLAB, with its state-of-the-art accredited laboratories and expert team, provides precise and fast testing services within the scope of BS 6319 testing.
This is a multi-part document divided into the following sections:
Chapter 1 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Method for Preparation of Test Samples
This Section of this British Standard provides a general introduction to testing resin compositions and describes a procedure for obtaining samples of resin compositions and preparing test samples under stated practical conditions or more closely controlled laboratory conditions. Applicable to thermoset cold-curing resin formulations, e.g. epoxide, polyester, acrylic, polyurethane. These formulations may contain liquid resins, liquid or powdered hardeners, aggregates and fillers, and may contain polymer-based grouts.
Chapter 2 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Method of Measuring Compressive Strength
This section of BS 6319 describes the procedure for measuring the compressive strength of cube-shaped resin-based mortar and concrete samples.
Chapter 3 Testing Resin Polymer/Cement Compositions for Use in Construction - Method of Measuring Flexural Strength
This part of BS 6319 describes methods for measuring the modulus of elasticity in flexural and flexural strength of polymer-based mortars and polymer/cement-based mortar samples in the form of rectangular prisms.
Chapter 4 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Method of Measuring Bond Strength (Beveled Shear Method)
This Section of BS 6319 describes a method for determining the oblique shear bond strength of resin bonded prisms representing various composite structures using the test procedure for compressive strength described in BS 6319-2.
Chapter 5 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Methods for Determining Density of Hardened Resin Compositions
Chapter 6 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Method for Determining the Modulus of Elasticity in Compression
This part of BS 6319 describes a method for determining the modulus of elasticity in the compression of resin-based mortar and concrete samples in the form of rectangular prisms.
Chapter 7 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Method of Measuring Tensile Strength
This section of BS 6319 describes a method for measuring the tensile strength of resin-based mortars and concrete poured as dumbbell-shaped briquette test specimens.
Chapter 8 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Method for Evaluating Resistance to Liquids
This Section of BS 6319 describes a method for assessing the resistance of resin-based mortars and concrete to liquids using the flexural strength test described in BS 6319-3.
Chapter 9 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Method for Measuring and Classifying Peak Exotherm Temperature
This Section of BS 6319 describes a measurement method for the highest exotherm temperature for resin-based materials for use in the construction industry.
Chapter 10 Testing Resin and Polymer/Cement Compositions for Use in Construction - Method for Measuring Deflection Temperature Under Flexural Stress
Chapter 11 Testing of Resin and Polymer/Cement Compositions for Use in Construction - Methods for Determining Creep in Compression and Tensile
This Chapter of BS 6319 describes methods for the determination of creep of polymer and polymer/cement mortar samples. Compression creep is measured on rectangular prisms and tensile creep is measured in neck samples with a maximum aggregate size of 2,4 mm.
Chapter 12 Testing Resin and Polymer/Cement Compositions for Use in Construction - Methods of Measuring Unlimited Linear Contraction and Coefficient of Thermal Expansion
This Part of BS 6319 describes methods for measuring linear shrinkage from the starting gel and coefficient of thermal expansion of cured polymer and polymer/cement mortars in the form of unrestricted thin strips (less than 20 mm thick).
EUROLAB assists manufacturers with BS 6319 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.
EUROLABreporting and certification activities, United Accreditation Foundation (UAF), Turkish Accreditation Agency (TÜRKAK) ve Enterprise Accreditation Foundation (EAF) based on the accreditation provided by the accreditation body. The Enterprise Accreditation Foundation (EAF) accreditation body is also a signatory of the United Nations (UN GLOBAL COMPACT) organization.
