EUROLAB, with its state-of-the-art accredited laboratories and expert team, provides precise and fast testing services within the scope of EN ISO 29862 testing. This standard specifies a set of methods for determining the peel adhesion properties of self-adhesive tapes.
This standard includes:
Method 1 gives a measure of the force required to remove an adhesive tape applied to a stainless steel panel at a 180° angle. A length of adhesive tape is applied to a standard plate and then fixed vertically to a clamp of a tensile testing machine. The other clamp of the machine pulls the free end of the adhesive tape to the plate at a 180° angle.
Adhesion strength is measured by the force required to continuously peel the adhesive tape from the plate, with the parting line perpendicular to the direction of the applied force.
Final wiping should be done with methyl ethyl ketone or acetone. The panel should be left to dry for at least 10 minutes. Panels that are not used within 10 hours should be cleaned again. To ensure consistent results, a new panel should be wiped at least 10 times with the final solvent before use.
Discard plates with stains, discoloration, or many scratches. Avoid touching the panel surface with your fingers. During storage, the panel must be protected from damage or contamination.
EUROLAB assists manufacturers with EN ISO 29862 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.