EUROLAB laboratory provides testing and compliance services within the scope of BS 5438 standard. The BS 5438 standard provides test methods for the flammability of textile fabrics when exposed to a small igniting flame applied to the face or bottom edge of vertically oriented samples.
Methods for the flammability of vertically oriented textile fabrics and assemblies subjected to a small igniting flame standard describes test methods for the flammability of textile fabrics by observing and measuring limited flame propagation when exposed to a small igniting flame and by observing and measuring vertically oriented test samples. It is applied to the face or lower edge.
This standard defines two main test methods:
During the test, the igniter flame is applied for 10 seconds or the flame exposure time specified in the performance specification.
The flammability test results of textiles are evaluated according to the following features:
Briefly, this standard defines methods for measuring flammability, limited flame spread, and flame propagation velocity. These test methods are intended to determine the flammability of vertically oriented single textile fabrics or multilayer fabrics exposed to a small igniting flame.
This standard describes test methods for flammability of vertically oriented textile fabrics, e.g. curtains and drapes, drapes, by observing and measuring their flammability when exposed to a small flammable flame. Test specimens may be of a single or multi-layer fabric representative of the product in use.
The first test method is to evaluate the shortest time that causes a test sample to ignite. An igniting flame is applied to the test specimen for two seconds. When the ignition of the test sample stops, the timing device is stopped and it is observed whether ignition has taken place.
The second test method is for any flame, after the igniter applies the flame for 10 seconds, it is observed whether any part of its lower boundary reaches the upper edge or one of the vertical edges of the test specimen or a hole forms.
EUROLAB assists manufacturers with BS 5438 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.
To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.