TSM 5746G Thermoplastic Elastomer Materials for Exterior Moldings

EUROLAB laboratory provides testing and compliance services within the scope of TSM 5746G standard. This standard covers thermoplastic elastomer materials, excluding soft polyvinyl chloride materials, to be used in exterior sills such as windows, roofs and bumpers.

Parts made from materials provided by this standard shall comply with the prohibitions and restrictions for substances of environmental concern in TSZ0001G. Exempt uses specified by the EU ELV Directive will comply with the latest version of the Directive.

Prepare a test solution by mixing 10 g of seven types of test powder in 50 mL of water. Spray this solution evenly onto the sample plate of a car wash tester. With the water provided, run the tester for 1 minute to allow the dust to adhere to the brush.

For comparison with a 50 100 mm test specimen, place a soft polyvinyl chloride sheet of the same size on the specimen table and evenly distribute 0.1 g of foundry sand (particle size: 150 - 210 m) over the test specimens.

Run the tester for 1 minute with the supplied water. After the procedure is complete, remove the test specimens and compare the scratch conditions on the specimen surfaces with the reference sheet made of soft polyvinyl chloride material.

EUROLAB assists manufacturers with TSM 5746G testing compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.