ISO 16017-2 Indoor, Ambient and Workplace Air - Test for Volatile Organic Compounds

Product Safety Tests

ISO 16017-2 Indoor, Ambient and Workplace Air - Test for Volatile Organic Compounds

EUROLAB, with its state-of-the-art accredited laboratories and expert team, provides precise and fast testing services within the scope of ISO 16017-2 testing. This standard provides general guidance for sampling and analysis of volatile organic compounds (VOCs) in air. It can be applied to indoor, ambient and workplace air.

ISO 16017-2 Indoor, Ambient and Workplace Air - Test for Volatile Organic Compounds

ISO 16017-2 is applicable to a wide variety of VOCs, including hydrocarbons, halogenated hydrocarbons, ester, glycol ethers, ketones and alcohols. For sampling these VOCs, a range of sorbents is recommended, where each sorbent has a different applicability range. Very polar compounds often require derivatization; very low boiling compounds are only partially retained by sorbents and can only be predicted qualitatively. Semi-volatile compounds are completely retained by the absorbers, but can only be partially recovered.

ISO 16017-2 applies to the measurement of airborne vapors of VOCs in the individual organic concentration range of approximately 8 mg/m0,3 to 0,002 mg/m3 for an exposure time of 100 hours or 3 g/m3. 300 to 3 g/mXNUMX of individual organics for an exposure time of four weeks.

The upper limit of the useful range is determined by the absorption capacity of the sorbent used and the linear dynamic range of the gas chromatograph column and detector, or the sample separation capacity of the analytical instrumentation used. The lower limit of the useful range depends on the noise level of the detector and the empty levels of analyte and/or interfering artifacts in the sorbent tubes.

Artifacts are typically sub-nanogram for well-conditioned Tenax GR and carbonaceous sorbents, carbonized molecular sieves and pure coals; At low nanogram levels for Tenax TA and at 5 ng to 50 ng levels for other porous polymers.

EUROLAB assists manufacturers with ISO 16017-2 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.

Get Offer Now

To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.

WhatsApp