ISO 13765-4 Refractory Mortars - Test for Flexural Adhesive Strength

Product Safety Tests

ISO 13765-4 Refractory Mortars - Test for Flexural Adhesive Strength

EUROLAB, with its state-of-the-art accredited laboratories and expert team, provides precise and fast testing services within the scope of ISO 13765-4 testing. This standard describes a method for determining the flexural bond strength of the bonded face between refractory bricks (after drying and firing) laid with refractory mortars.

ISO 13765-4 Refractory Mortars - Test for Flexural Adhesive Strength

Cut test pieces from refractory bricks for the test according to the dimensions and tolerances shown in Table 1. The adjacent edges of the test pieces shall be perpendicular to each other and the corners shall be square. The surfaces of the test pieces shall be smooth, free of cracks and the surfaces to be bonded shall be clean. Each ISO 13765-4 test piece will have an uncut face for bonding.

Before the test, put the 110 C ± 5 test pieces in the drying oven, the temperature for 8 hours or until the constant weight is reached
raise and hold . Then naturally cool to room temperature.

For dry mortars, take 1,5 kg with a balance and mix with water according to ISO 13765-1 or ISO 13765-2 to obtain the desired consistency. Determine the consistency and let it rest for 30 minutes or according to the manufacturer's directions.

EUROLAB assists manufacturers with ISO 13765-4 test compliance. Our test experts, with their professional working mission and principles, provide you, our manufacturers and suppliers, the best service and controlled testing process in our laboratories. Thanks to these services, businesses receive more effective, high-performance and quality testing services and provide safe, fast and uninterrupted service to their customers.

Get Offer Now

To get an appointment, to get more detailed information or to request an evaluation, you can ask us to fill in our form and reach you.

WhatsApp